Let's See Your Semi-Custom Tikka Builds

[Throwin Darts]

What magazine are you running with this setup?

It’s the MDT Polymer AICS 5 round mag in the pic. I’m thinking about getting the 3 round version as well because it sits flush with the bottom of the chassis

 

[Steel Rain]

They are the LOW rings. I also have the UM level on it as well. If you order some rings from UM, might as well get the level.

I have UM Lows, same scope, and same stock. I think I’d like the mediums with this stock to clear the hand guard fore end.

 

[redtop65]

Made a couple changes this week. Picked up a Trijicon Tenmile HX 3-18x50 and dropped it in an Mesa Altitude stock. Finished for now until I rebarrel it this winter. View attachment 452054

What does the rig weigh?

 

[BigBelle]

 

[bpitcher]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K




Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15


Shots 15-20

 

[sierracharlie338]

Finished up my 6 CM build.

18" PVA .750 taperless,1/7 twist, 5 spiral flutes
UM Bolt knob, rings, and level
Stockys VG
Trijicon credo 2.5-15
OCL Hydrogen K


View attachment 830509

Took it to the range today with a box of factory Hornady 103 ELDX. 5 Shots to zero and confirm.

Shots 5-15


Shots 15-20

Great spec’d build! Very similar to what I’ll be building for a next project.

 

[Packmansion]

Tikka t3x
McGowen 7 Saum prefit bartlein 3B contour 24 inch
Salmon river solution brake,20moa rail and arca pic rail
Stockys vg hunter
Arken EPL-4
Warne hyperlite rings

How do you like the EPL-4

 

[Harronek]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

 

[Brontosaurus]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

Epic

 

[Farmcritter]

Not much of a Semi Custom build compared to some of the rifles on show here .
This was and still is a fun budget build .
This is my old T3 that was a .223
When the barrel finally gave up I rebarrelled to a 6x45 ( 6mm223 )

IBI 1-8 twist barrel , 22 inch
Waters Magazine that allows an OAL length of 2.6 inches
Found a green Super Varmint stock for cheap
1.5 pound trigger spring

Shoots Sierra 85hpbt at 2865 fps
Averages 0.5 moa

Great picture! I had a bully many moons ago. He was an awesome dog! Still miss the ole boy.

 

[Harronek]

Great picture! I had a bully many moons ago. He was an awesome dog! Still miss the ole boy.

Yeh…

The Bully’s grow on you after a while .
You spend the first two years pulling your hair out , and by about 3 years they have you trained just the way they want you .


Ken

 

[Hnthrdr]

Tikka stainless, roughteck fluted bolt, 6mm cm x caliber, xlr magnesium, trijicon 2.5-15, sports match rings, stock will likely get replaced to an ultra dyne light weight it’s about 7.5lbs w/o can cant wait to shoot it