Let's See Your Semi-Custom Tikka Builds

WyldGoose

FNG
Joined
Oct 16, 2022
Messages
90
Location
AZ
Just pulled my latest project out of the mail today. It’s a stainless T3 action that I had rebarreled to 6CM.

The barrel is an 18” Ace in a Tikka Sporter contour, but I had it flared slightly at the muzzle to get 5/8-24 threads and a bit of a shoulder. I hope it shoots the 108 ELDM factory load well. Thanks to @wind gypsy for the tip on getting the SAAMI spec chamber. All I need now if for my other Rokstok to ship. I’m pumped!

View attachment 781541
View attachment 781542
Nice! What twist did you go with for that barrel?
 

Jsmalls273

Lil-Rokslider
Joined
Jan 13, 2021
Messages
121
Just pulled my latest project out of the mail today. It’s a stainless T3 action that I had rebarreled to 6CM.

The barrel is an 18” Ace in a Tikka Sporter contour, but I had it flared slightly at the muzzle to get 5/8-24 threads and a bit of a shoulder. I hope it shoots the 108 ELDM factory load well. Thanks to @wind gypsy for the tip on getting the SAAMI spec chamber. All I need now if for my other Rokstok to ship. I’m pumped!

View attachment 781541
View attachment 781542

View attachment 781543
What is the rebarrel process? Is your original barrel changed to a different caliber? I'm just confused on the process! I'm impatiently awaiting my first Tikka to show up in 243 with thoughts to eventually change to 6cm. The 243 is a 1/10 twist unfortunately but it'll work just fine for a while!

Sent from my SM-S921U using Tapatalk
 

Encore4me

Lil-Rokslider
Joined
Jan 28, 2023
Messages
114
272c32abb58be8efbde36a5d50bc2048.jpg

Nightforce NX8 2.5-20
McMillen Mountain Stalker stock
DeadAir Nomad Ti xc suppressor
T3x Superlite 300 WM.


Sent from my iPhone using Tapatalk
 
Joined
Sep 25, 2019
Messages
74
Location
Western Oregon
Just pulled my latest project out of the mail today. It’s a stainless T3 action that I had rebarreled to 6CM.

The barrel is an 18” Ace in a Tikka Sporter contour, but I had it flared slightly at the muzzle to get 5/8-24 threads and a bit of a shoulder. I hope it shoots the 108 ELDM factory load well. Thanks to @wind gypsy for the tip on getting the SAAMI spec chamber. All I need now if for my other Rokstok to ship. I’m pumped!

View attachment 781541
View attachment 781542

View attachment 781543
Who did you have spin up that barrel?
 

Blaw

WKR
Joined
Oct 9, 2017
Messages
356
Location
Calgary, Alberta, Canada
Needs rattle can badly.

16.5” 6.5cm threaded and adapted by Marty.
Scythe Ti
SWFA 10x
UM Mid Rings
UM level
RokStok
High Desert Linear BM
Factory 120 eld-m @ 2700 fps

7lb 14oz unspressed
8lb 6oz as shown
9lb 2oz w/ ill-fitting Gunwerks bipod

Worth noting that with a light scope, short barrel, and light suppressor, the 29oz Rokstok certainly results in a chunkier weight than one might expect from a compact carbon hunting rifle. That being said, I truly don't want to shoot my other stocks anymore (besides my Bravo and modified factory, but including the Phoenix 2, with which I was quite happy before for competition).

-J
how do you like shooting the 10x scope? I have the same but wonder if at 100 yards or less it may really suck?
 

NSI

WKR
Shoot2HuntU
Joined
May 19, 2021
Messages
928
Location
Western Wyoming
how do you like shooting the 10x scope? I have the same but wonder if at 100 yards or less it may really suck?
What I like about the SWFA fixed 10:

1) Known good
2) Simple
3) Good match of power and reticle design
4) Light
5) Inexpensive

What I dislike about it:

1) FOV even at 300 meters is too small for my liking. Makes me nervous, less about spotting impacts and more about tracking animal movement after the shot.

2) Absurdly tall turrets enable substantial elevator travel but are snaggy and bulky to sight over.

3) No zero stop (other than the washer hack.

4) Exposed unlocked elevation and windage (unless you just tape up the windage) train you to always check turret settings but aren’t the optimal design for field shooting.

Long story short, I’d throw another maven at this rifle, even with 7oz penalty, if I had a spare.

-J
 

pender1

FNG
Joined
Jul 26, 2024
Messages
17
how do you like shooting the 10x scope? I have the same but wonder if at 100 yards or less it may really suck?
I'm running a 10x SWFA as well, it's really not bad at close range. Most of the stands I hunt are <150yards and I dropped a buck at ~100 a few weeks ago. An adjustable would be nice just for sighting and tracking, but it's a good magnification for me at that range.
 

Blaw

WKR
Joined
Oct 9, 2017
Messages
356
Location
Calgary, Alberta, Canada
What I like about the SWFA fixed 10:

1) Known good
2) Simple
3) Good match of power and reticle design
4) Light
5) Inexpensive

What I dislike about it:

1) FOV even at 300 meters is too small for my liking. Makes me nervous, less about spotting impacts and more about tracking animal movement after the shot.

2) Absurdly tall turrets enable substantial elevator travel but are snaggy and bulky to sight over.

3) No zero stop (other than the washer hack.

4) Exposed unlocked elevation and windage (unless you just tape up the windage) train you to always check turret settings but aren’t the optimal design for field shooting.

Long story short, I’d throw another maven at this rifle, even with 7oz penalty, if I had a spare.

-J
Good to know, I have a LRHS right now.....but those fixed swfa...they are just so simple
 

8404

FNG
Joined
Jun 11, 2022
Messages
46
Slick, curious what it weighs?
She’s not light. 11lbs 3oz.

I had a Tipro 3 brake and lighter rings on it but I switched to the Hellfire brake and heavier rings.

I like the added weight in terms of shoot ability, I figure I can shed weight from the rest of my pack by getting lighter gear and streamlining my system.

I gave a lot of thought to what this rifle is for. I wanted a more compact system for backcountry hunts where I’m moving through brush. The folding chassis accomplished that goal. The intent was never really to end up with a super light rifle.

I only weigh 150 pounds so making the 7PRC behave well enough to spot my own shots is my priority. A little more weight on the rifle is okay with me.
 

Blaw

WKR
Joined
Oct 9, 2017
Messages
356
Location
Calgary, Alberta, Canada
View attachment 423653

Behold, the Mule.

Not-so adjustable raised buttpad
Aerospace tape and wood pulp composite cheek riser
Big bolt cover doohickey
Infinitely customizable CTS system
Infinitely customizable CTS system refill
Backyard Customs kydex brass exhaust
Imported Finnish vertical grip
Extra power magazine (150%)
Integrated muzzle cover dispenser
600%x42 Super Sniper scope
SportsMach84 rings

Follow me for more tips and tricks.
so custom !!!
 

bober90

FNG
Joined
Sep 11, 2022
Messages
69
Location
Indiana
How do you like the stock? Been strongly considering one for mine?
It's great. I've had it for about 2 years now and the process for getting it was a real pain. Just dropped in the barreled action and torqued it up and has been shooting great. I've taken it on a spring bear hunt in Idaho and several whitetail hunts and it's been great. AG is taking orders for inletting now, which should make the process of getting one smoother...

I am intrigued by the Rokstock and may try one of those out for my other Tikka when orders open back up.
 

2STRO

FNG
Joined
Jan 8, 2020
Messages
19
Location
Fruitland Idaho
I've been lugging my Tikka Whitetail Hunter 300 WM around for the last 15 years or so, and I'm ready to upgrade to something a little lighter. Am I better off buying a new Tikka t3x lite in SS, or just making upgrades to my current gun? If I kept the current gun, a new stock would cost almost as much as a whole new rifle.

Ultimately, I'm looking for that "custom" look and feel without breaking the bank. Let's see some of your semi-custom Tikkas and a list of upgrades/modifications, with an approximate cost.
 

2STRO

FNG
Joined
Jan 8, 2020
Messages
19
Location
Fruitland Idaho
Factory barrel 300 wsm just added the brake, cerakote and chassis.
Chassis is for sale also!
 

Attachments

  • IMG_0377.jpeg
    IMG_0377.jpeg
    772.1 KB · Views: 138
  • IMG_0939.jpeg
    IMG_0939.jpeg
    562.7 KB · Views: 138
Top