Let's See Your Semi-Custom Tikka Builds

[aschuler]

This is my "easy button semi-custom".
Tikka T3x Lite SS started as 243win 1-10 twist. I put a Preferred prefit on it chambered in 6 creedmoor, 18" for suppressor.
Hogged out the barrel channel for plenty of clearance and put a Tikka vertical grip on it.

Shooting the 108 eldms at 2825fps.

 

[medvedyt]

-Tikka t3x lite 30-06
-vertical grip
-sports match rings
-shave 3-10 scope
-limbsaver recoil pad
-mtn gear pic real (not in the picture)
-high desert bottom metal

-barrel channel hogged out
-Patel cut to 18” and permanently threaded for 5/8x24

-TBAC ultra 7, SiCo scythe

-180g partition at 2710fps

This is my "easy button semi-custom".
Tikka T3x Lite SS started as 243win 1-10 twist. I put a Preferred prefit on it chambered in 6 creedmoor, 18" for suppressor.
Hogged out the barrel channel for plenty of clearance and put a Tikka vertical grip on it.

Shooting the 108 eldms at 2825fps.
View attachment 741082View attachment 741083

how do you like the vertical grip compared to the regular one? i have big hands but not sure if it will be better or not,.

thank you.

 

[thinhorn_AK]

how do you like the vertical grip compared to the regular one? i have big hands but not sure if it will be better or not,.

thank you.

Hard to answer that. When I got my first t3x I was given a vertical grip. I just sort of started using them, now I have them on all my tikkas, I personally think they feel better but I havnt tried one without the vertical grip for a few years now.

 

[aschuler]

how do you like the vertical grip compared to the regular one? i have big hands but not sure if it will be better or not,.

thank you.

I really prefer it. I switched both my Tikkas to the vertical grip.

 

[HighUintas]

-Tikka t3x lite 30-06
-vertical grip
-sports match rings
-shave 3-10 scope
-limbsaver recoil pad
-mtn gear pic real (not in the picture)
-high desert bottom metal

-barrel channel hogged out
-Patel cut to 18” and permanently threaded for 5/8x24

-TBAC ultra 7, SiCo scythe

-180g partition at 2710fps

How much does your scythe seem to tame the recoil on your '06? Would it be comparable to a 6.5cm?

 

[thinhorn_AK]

How much does your scythe seem to tame the recoil on your '06? Would it be comparable to a 6.5cm?

Yeah that’s about the closest comparison I can make with the rifles I have. I’m not quite able to fully spot every shot but it’s pleasant to shoot.

I shot 2 caribou with it last spring and was able to watch them drop but couldn’t see the bullet impact.

 

[Dbevans]

Tikka T3x D-18 Cabelas 300 wsm in a manners topped with a nightforce nx8 2.5-20.


Sent from my iPhone using Tapatalk

 

[eightyeight mag]

Tikka t3 compact in 7-08
Manners eh1-a
Cdi bottom metal with flush fitting mdt polymer mag.
Krg Midas trigger
Sterk bolt

 

[NSI]

Tikka t3 compact in 7-08
Manners eh1-a
Cdi bottom metal with flush fitting mdt polymer mag.
Krg Midas trigger
Sterk bolt
View attachment 741341View attachment 741342

How do you like the KRG trigger?

-J

 

[eightyeight mag]

How do you like the KRG trigger?

-J

I really like it.
Fully adjustable.
Awesome trigger.

 

[NSI]

6.5cm NRL light gun in the ARCA Bravo, 18” .223 RSS in the modded factory.

AMA



-J

 

[aschuler]

6.5cm NRL light gun in the ARCA Bravo, 18” .223 RSS in the modded factory.

AMA

View attachment 742851

-J

Very nice, I love the paint.
How much does your NRL gun weigh?

 

[NSI]

Very nice, I love the paint.
How much does your NRL gun weigh?

Thanks! Rattle canned with the camo stuff.

It’s 11lb 4 oz plus the Scythe. Doesn’t allow for a bipod which is fine by me, after my indoctrination at S2hU. Folks underestimate how heavy these Veil / D18 / Roughtech barrels are.

-J

 

[wind gypsy]

Thanks! Rattle canned with the camo stuff.

It’s 11lb 4 oz plus the Scythe. Doesn’t allow for a bipod which is fine by me, after my indoctrination at S2hU. Folks underestimate how heavy these Veil / D18 / Roughtech barrels are.

That looks like a primo budget nrl setup especially for someone who’s already got an extra bravo laying around. Does it shoot tight?

 

[matthewmt]

Has anyone tried to 3d print or talked to anyone in the industry about making a more vertical VG for tikka stocks? I feel like that would be a cool option to shorten trigger pull etc

Sent from my SM-G973U using Tapatalk

 

[HighUintas]

Has anyone tried to 3d print or talked to anyone in the industry about making a more vertical VG for tikka stocks? I feel like that would be a cool option to shorten trigger pull etc

Sent from my SM-G973U using Tapatalk

I'd like to see someone try it w a 3D printer. I'm guessing the grip might get a little too thick to be able to comfortably put the thumb up on the tang or wrap it around if the grip is made more vertical.

I've thought of using that air epoxy stuff to make a vertical grip on a laminate stock I have, but the potential grip thickness and thumb placement has prevented me from trying it.

 

[Moose83]

Has anyone tried to 3d print or talked to anyone in the industry about making a more vertical VG for tikka stocks? I feel like that would be a cool option to shorten trigger pull etc

Sent from my SM-G973U using Tapatalk

I'd like to see someone try it w a 3D printer. I'm guessing the grip might get a little too thick to be able to comfortably put the thumb up on the tang or wrap it around if the grip is made more vertical.

I've thought of using that air epoxy stuff to make a vertical grip on a laminate stock I have, but the potential grip thickness and thumb placement has prevented me from trying it.

I've made my own using the factory sporter grip, a chunk of 1/2" uhmw plastic, some water putty, and a farriers rasp. It works great... but probably more work than most would want to do.

 

[matthewmt]

I've made my own using the factory sporter grip, a chunk of 1/2" uhmw plastic, some water putty, and a farriers rasp. It works great... but probably more work than most would want to do.View attachment 743023

For something modular like the t3x grips I'd imagine a company could capitalize and make a small variety for a drop in replacement. No difference between a new grip.on an AR IMHO.

Sent from my SM-G973U using Tapatalk

 

[Hnthrdr]

Tikka t3x ss 6.5cm, cut to 16”, 1/2x28 thread, cerakote, recoil pad, trigger spring, Lumley bolt handle, vertical grip. Topped with a 2.5-15x credo & harvester evo. First 15 shots with factory 140 eld-m’s once boresighted need to measure but I think it was around 12 shots in 1.4 inches, I’ll take it

 

[HingleMcCringleberry]

It's done. Proof 6 creed barrel cut to 18", rokstok, swfa 3-15 in sportsmatch rings, AB raptor 10 with 5" reflex.