Let’s see those big bores!

[robtattoo]

This thread coming back sure isn't helping my desire to build a 9.3x62...

Do it! Here's my nod to Phil Shoemaker's gun, shown earlier, in 9.3x62


Seems to work, too!


And a 9.3x57 I'm building up for a friend.

 

[Steve O]

Okay, so as long as we’re going to show off a few of our kills with the big bores, here’s a few of mine with the .375 M70.

The rifle isn’t in the picture but that’s what was used.

Sent from my iPhone using Tapatalk

You don’t see velvet moose very often. Beautiful, all of those!

 

[letrbuck]

Do it! Here's my nod to Phil Shoemaker's gun, shown earlier, in 9.3x62
View attachment 507979

Seems to work, too!
View attachment 507980

And a 9.3x57 I'm building up for a friend.
View attachment 507981

You sir are not helping my marital or financial status....

I've been torn between getting a Husqvarna or building/reboring from a stainless Ruger as a companion to my all weather in 280...

 

[AK Troutbum]

You don’t see velvet moose very often. Beautiful, all of those!

Thanks! That was from a float hunt up in northwestern Alaska, killed in late August.


Sent from my iPhone using Tapatalk

 

[fatbacks]

Here is the newest big bore addition to my family.... new Marlin made by Ruger 45-70.

 

[Wapiti1]

9.3X64 Brenneke built on a VZ24 action, Lothar Walther barrel, 2pos Wisner safety, Wisner floorplate, my own shop made bottom metal, shop made bolt handle, nice stick of claro walnut from Cecil Fredi. Same rifle, different scopes in the two photos. The hartebeest is from Namibia.

Jeremy

 

[gbflyer]

View attachment 508192

View attachment 508193
9.3X64 Brenneke built on a VZ24 action, Lothar Walther barrel, 2pos Wisner safety, Wisner floorplate, my own shop made bottom metal, shop made bolt handle, nice stick of claro walnut from Cecil Fredi. Same rifle, different scopes in the two photos. The hartebeest is from Namibia.

Jeremy

I caretake one of those in a Ruger 77. It’s a fine cartridge.

 

[thinhorn_AK]

I picked that one up new for $600, back in '03, when Kmart went out of business in Anchorage. Of all my rifles, that one has notched the most tags with 8 caribou, 4 moose, and 2 brown bears.

My stainless classic 375 I ended up with is from 1994 or so.

 

[ldmay375]

Top: 416 Ruger
Bottom: 375 Ruger

 

[JoSwan]

Dakota 76 375 Dakota

 

[JoSwan]

CZ 550 416 Rigby

 

[thinhorn_AK]

Winchester m70 stainless classic 375HH with a trijicon credo HX 1-4.

 

[Bmhunts]

AHR 458 Lott


Sent from my iPhone using Tapatalk

 

[robtattoo]

Mostly finished on these two.
I still need to regulate sights on both. The top needs the rear blade bluing, the bottom needs regulating & a full blue (I ran out of Oxpho)

Both are Husqvarna M46s in 9.3x57. The top rifle came with a badly cut, 20" barrel so i cut it back to 19 & recrowned it. This one's a gift for a buddy who's only real hunting interest is pigs in Florida, so velocity ain't a concern. It'll never take a shot past 50yds.
Trouble is, I kinda fell in love with how trim & nimble it is while I was putting it together, so i did another for myself, but with a 20" tube (it balanced just a hair better)

 

[Fatcamp]

Mostly finished on these two.
I still need to regulate sights on both. The top needs the rear blade bluing, the bottom needs regulating & a full blue (I ran out of Oxpho)

Both are Husqvarna M46s in 9.3x57. The top rifle came with a badly cut, 20" barrel so i cut it back to 19 & recrowned it. This one's a gift for a buddy who's only real hunting interest is pigs in Florida, so velocity ain't a concern. It'll never take a shot past 50yds.
Trouble is, I kinda fell in love with how trim & nimble it is while I was putting it together, so i did another for myself, but with a 20" tube (it balanced just a hair better)

View attachment 522261

What kind of value would you place on these? As in, if you had to start over from scratch?

 

[robtattoo]

If I wanted to sell a completed gun? Maybe $500? Most of that is labor & additional parts though (front & rear sight bases & barrel band)
The top rifle i gave $150 for, the bottom was $275.

If you look up Simpsons Firearms, they import a bunch in different grades & retail them out at $250-450

 

[Fatcamp]

If I wanted to sell a completed gun? Maybe $500? Most of that is labor & additional parts though (front & rear sight bases & barrel band)
The top rifle i gave $150 for, the bottom was $275.

If you look up Simpsons Firearms, they import a bunch in different grades & retail them out at $250-450

That's a cool website!!! Thank you for sharing.

 

[SC HUNTER]

If I wanted to sell a completed gun? Maybe $500? Most of that is labor & additional parts though (front & rear sight bases & barrel band)
The top rifle i gave $150 for, the bottom was $275.

If you look up Simpsons Firearms, they import a bunch in different grades & retail them out at $250-450

Just what I need. Another gun site to buy more guns from.

 

[Dennis]

Built to match Phil Shoemakers legendary beast Ol' Ugly and feed like butter! Thanks Phil and Tia! Custom Mauser 98 chambered in 458 Winchester Magnum, 21" barrel with four round magazine. Leupold 2.5 heavy duplex crosshairs with quick release rings and flip up peep plus XO detachable peep. Built by Master Gunsmith Lon Paul who also built a matching 9.3 X 62 on CZ 550 action with 1.5 X 5 Leupold with CDS.

 

[AK Troutbum]

Built to match Phil Shoemakers legendary beast Ol' Ugly and feed like butter! Thanks Phil and Tia! Custom Mauser 98 chambered in 458 Winchester Magnum, 21" barrel with four round magazine. Leupold 2.5 heavy duplex crosshairs with quick release rings and flip up peep plus XO detachable peep. Built by Master Gunsmith Lon Paul who also built a matching 9.3 X 62 on CZ 550 action with 1.5 X 5 Leupold with CDS.

Nice, although it’s got a ways to go in the ugly department, if you’re trying to match Phil’s rifle.


Sent from my iPhone using Tapatalk