KIFARU ARK FRAME review

Fedster

FNG
Joined
Feb 28, 2016
Messages
66
Location
Finland
It’s funny to hear someone say that. After spending a small fortune on the ARK frame and Fulcrum pack, with all the goodies, I found the exact same thing as you. Literally to a T. After packing an Osprey Xenith for all of the 2023-2024 season, and eventually busting the frame through the fabric, I was in the market for a new pack. I did days of research, and came to the conclusion that the Kifaru Ark frame was going to be a buy once and forget about it type of pack. My initial impression was that the dense foam, and shape of the lumbar pad, tapering away toward the bottom, didn’t fit my tall, skinny frame well at all (6’1” 185lbs 30.5” waist). All of the contact was made on the top 2”, of the lumbar pad, it took irregular posture adjustment and 40+lbs to get the pad to compress into my back a bit better. But it isn’t fitting right, no matter how much I want it work. The frame and pack is made with incredible quality, and if it fit me right, I’m sure I’d be incredibly happy. Regardless, I think I’ll be trying a Stone Glacier, EXO Mountain, or Mystery Ranch and keeping the pack that rides the best.
keep the frame and see if you can put a different belt and shoulder straps on it. That is my plan in case it does not fit me well -- I'm after the frame not the belt.
 
Joined
Sep 28, 2018
Messages
2,199
Location
VA
..................
All of the contact was made on the top 2”, of the lumbar pad, it took irregular posture adjustment and 40+lbs to get the pad to compress into my back a bit better. But it isn’t fitting right, no matter how much I want it work..............

I got my Ark frame last night. I'm a touch taller than you but got you by a bit on weight. I'm 235#. I attached a Ma Duece to the frame and put my 3 year old in it. She's sub 40#.. The frame seemed to pivot on the lumbar pad and shift a little bit side to side. I tightened the should straps a bit and it fixed the shifting but I think having the straps like that, it was a bit too tight.

My conclusion is that I need to probably drop 70#+ in the bag to get the lumbar pad to "break in" and conform a bit better. I'll have a longer review and conclusion hopefully by next monday.
 

plebe

Lil-Rokslider
Joined
Jan 15, 2021
Messages
266
I got my Ark frame last night. I'm a touch taller than you but got you by a bit on weight. I'm 235#. I attached a Ma Duece to the frame and put my 3 year old in it. She's sub 40#.. The frame seemed to pivot on the lumbar pad and shift a little bit side to side. I tightened the should straps a bit and it fixed the shifting but I think having the straps like that, it was a bit too tight.

My conclusion is that I need to probably drop 70#+ in the bag to get the lumbar pad to "break in" and conform a bit better. I'll have a longer review and conclusion hopefully by next monday.

Someone mentioned that Aaron stated you can break in the foam by putting a weight on it. Baseball mitt kind of stuff.
 
Last edited:
Joined
Sep 14, 2023
Messages
78
Location
Chico, CA
Got my ARK in yesterday. I can definitely tell what some guys have mentioned about the top of the lumbar pad. However, that seemed to settle in really quickly after putting it on a hand full of times with 45+ lbs in the pack. My biggest question for everyone is have you tried setting it up to simulate carrying meat on the meat shelf? I went to do this to load my sand bag there and couldn’t figure out how to set up the top connections between the bag and the frame. I could set up the load lifters on the frame with those tab loops, but couldn’t figure out how to set up the bag to frame connections. Anyone know how to do this? Haven’t seen a video from Kifaru in this yet…
 
Joined
Sep 28, 2018
Messages
2,199
Location
VA
Got my ARK in yesterday. I can definitely tell what some guys have mentioned about the top of the lumbar pad. However, that seemed to settle in really quickly after putting it on a hand full of times with 45+ lbs in the pack. My biggest question for everyone is have you tried setting it up to simulate carrying meat on the meat shelf? I went to do this to load my sand bag there and couldn’t figure out how to set up the top connections between the bag and the frame. I could set up the load lifters on the frame with those tab loops, but couldn’t figure out how to set up the bag to frame connections. Anyone know how to do this? Haven’t seen a video from Kifaru in this yet…

When in "meat shelf" mode the bag does not slip over the top of the frame. you cinch your bag side straps to hold the meat up against the frame. The load lifter attach to the frame itself use the tabs that came with the frame
 
Joined
Sep 14, 2023
Messages
78
Location
Chico, CA
When in "meat shelf" mode the bag does not slip over the top of the frame. you cinch your bag side straps to hold the meat up against the frame. The load lifter attach to the frame itself use the tabs that came with the frame

I knew that much, just could not figure out how they did the bag-to-frame connection. Aron got back to me on an IG DM and showed me a video they have on YouTube that Kenneth did. It’s a very short video, but explains it. You have to double up two of the tab loops at the top. So, will try it out when I can.
 
Joined
Nov 7, 2012
Messages
8,053
Location
S. UTAH
I knew that much, just could not figure out how they did the bag-to-frame connection. Aron got back to me on an IG DM and showed me a video they have on YouTube that Kenneth did. It’s a very short video, but explains it. You have to double up two of the tab loops at the top. So, will try it out when I can.
Link to video would be great.
 
Joined
Sep 28, 2018
Messages
2,199
Location
VA
Well I did a true 95# ruck yesterday. 1 mile loop . 50ft of elevation gain and loss. Nothing "extreme" , but I need to repack the weight a bit better because i had a 30# lever(my child) hanging waaay off the back. I had to lean forward a bit to walk, but the weight sat in a distributed fashion. Nothing was "digging in". I had to lean forward a bit to keep from falling backwards. I'll probably have to scoot the child carrier up a little higher and to fix this.

My front hip muscles are a touch sore today
 
Joined
Sep 28, 2018
Messages
2,199
Location
VA
95# weighted bar on your shoulders for a mile is the 'meet yourself mile'....cuz after a mile @ 95# on you; you finally know who you are. :)

If its on my shoulders I might actually be able to do it faster because it would be on my shoulders.. not hanging 18" off the back

My 3 year old had the gall to ask me "why are you stopping daddy?"
 
Joined
Nov 27, 2019
Messages
57
I'm thinking the ARK and a straight jacket as a good day pack, multi day (with a dry bag) combo......anybody got this setup? Thoughts?
I be e been researching the options like crazy and have come to the exact same conclusion. Use the straight jacket as a meat pack out. But also have the option of using a small to large dry pack duffle to carry gear. I’m going to use a KUIU dry duffle to pack in gear when needed. But use the straight jacket for multiple other uses. Biggest problem = finding a good Straight Jacket!
But I agree with your assessment 1000%! Perfect setup.
 
Joined
Jun 5, 2024
Messages
13
How’s the durability/strength under heavy loads seem for the Ark, the metal stays on the duplex always gave me a level of comfort that I didn’t feel could be replicated with a composite frame.
 
Joined
Oct 29, 2016
Messages
757
I be e been researching the options like crazy and have come to the exact same conclusion. Use the straight jacket as a meat pack out. But also have the option of using a small to large dry pack duffle to carry gear. I’m going to use a KUIU dry duffle to pack in gear when needed. But use the straight jacket for multiple other uses. Biggest problem = finding a good Straight Jacket!
But I agree with your assessment 1000%! Perfect setup.

Seems to still be in stock
 

robby denning

Administrator
Staff member
Joined
Feb 25, 2012
Messages
15,703
Location
SE Idaho
How’s the durability/strength under heavy loads seem for the Ark, the metal stays on the duplex always gave me a level of comfort that I didn’t feel could be replicated with a composite frame.
not sure if you already saw this thread/review from a member who did his own review against the duplex. Might answer some questions

 
Top