JUST BUILT IT

[Paridgerunner]

Wax paper or butchers paper? If anyone wants parts n dimensions let me know. Its heavy duty, forgot 2 Ts on feet. It's 6ft tall so u can shoot straight into it.

 

[Steve1662]

Fancy! I just flip a barstool upside down and stack it on another batstool. I then tape a piece of computer paper between the legs. Works for me.

Sent from my SM-G950U using Tapatalk

 

[Paridgerunner]

Word, everything I do has to b professional n over engineered, it's just who I am lmao. And have a store front and everything but my micro vise to open a shop.

 

[Paridgerunner]

Fancy! I just flip a barstool upside down and stack it on another batstool. I then tape a piece of computer paper between the legs. Works for me.

Sent from my SM-G950U using Tapatalk

Wax freezer or butcher paper?

 

[Steve1662]

Wax freezer or butcher paper?

Have not used either. I did use some of my kid's art paper before. Not sure if its this but close: https://www.amazon.com/Hape-Paper-R...&keywords=roll+of+paper&qid=1626921423&sr=8-3

Sent from my SM-G950U using Tapatalk

 

[OR Archer]

Go to Home Depot or Lowe’s and get a roll of paper in the painting section. Used that for years. Perfect thickness.

 

[Paridgerunner]

Go to Home Depot or Lowe’s and get a roll of paper in the painting section. Used that for years. Perfect thickness.

Ty, used wax paper n its to hard to c 4me. Was gonna try brown butchers paper which sounds close to same material as u found.

 

[xcutter]

I use wrapping paper left over from Christmas.

 

[Reburn]

I use this. Papertune bows and patterning shotguns.

Amazon.com

 

[5MilesBack]

I built one of those several years ago, then figured out it was soooooo much easier to just shoot bare shafts and fletched at 20 yards rather than messing with all that paper. Or jumping right to long range BH tuning from the start. That's more fun too. But butcher paper works very well.

 

[Paridgerunner]

1 1/2in Pipe 10ft - 3
1 1/2in Ts - 6
1 1/2 to 1in Ts - 2
1 1/2in 90° elbows - 2
1 1/2in to 1in adapter - 2
These go in top elbows to and reduce pipe to 1in.
1 1/2 to 1/2in Ts - 2
24in precut pipe
1in - 2
1/2in - 2

4 feet cut 25"
2 Bottom uprights 33"
2 Small pipe between Ts maybe 8"
2 Top uprights 31"
2nd 24x1/2in Pipe was just used to extend the roll away from stand. Just cut like 2 - 7" pcs out of it.
This can b done lighter n cheaper. There r many like it but this one is Mine!

 

[JFin15]

1 1/2in Pipe 10ft - 3
1 1/2in Ts - 6
1 1/2 to 1in Ts - 2
1 1/2in 90° elbows - 2
1 1/2in to 1in adapter - 2
These go in top elbows to and reduce pipe to 1in.
1 1/2 to 1/2in Ts - 2
24in precut pipe
1in - 2
1/2in - 2

4 feet cut 25"
2 Bottom uprights 33"
2 Small pipe between Ts maybe 8"
2 Top uprights 31"
2nd 24x1/2in Pipe was just used to extend the roll away from stand. Just cut like 2 - 7" pcs out of it.
This can b done lighter n cheaper. There r many like it but this one is Mine!

I read, "Its 6 foot high so you can shoot strait" and a pic of your 4wheeler....
I thought to myself, "now heres a guy who's always thinking shootin deer, regardless!"
Notthat I've ever shot one of a 4wheeler or anything, just sayin. RMFT

 

[JFin15]

@Paridgerunner pm me if you would, I'd like to ask you a question about some arrows you had.