Hunter Sargent
Lil-Rokslider
- Joined
- May 2, 2016
- Messages
- 249
Is this copper fouling causing poor accuracy? UPDATED
I’ve been struggling for 2 weeks to work up a load with acceptable accuracy for this rifle and it’s driving me nuts! Working up from min to max loads in .5 gr increments is producing head-scratching results with accubonds and partitions. While cleaning I noticed these copper streaks in the bore. I have now cleaned this rifle 15 times in 2 days and the streaks are about half the amount they were...but are now no longer getting any better. Could this be causing my accuracy problem?
I’ve been struggling for 2 weeks to work up a load with acceptable accuracy for this rifle and it’s driving me nuts! Working up from min to max loads in .5 gr increments is producing head-scratching results with accubonds and partitions. While cleaning I noticed these copper streaks in the bore. I have now cleaned this rifle 15 times in 2 days and the streaks are about half the amount they were...but are now no longer getting any better. Could this be causing my accuracy problem?
Last edited: