Hunting bullet recommendations for .280 AI

grimm158

FNG
Joined
Jun 7, 2022
Messages
28
Location
Idaho
I love my accubonds but haven't seen them on shelves in almost 3 years now. It's about time to switch to Hornady/Hammer since you can actually buy them. I just haven't been impressed with what ELDX's do on game. They've dropped everything but have been a little too explosive for my taste.
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
I love my accubonds but haven't seen them on shelves in almost 3 years now. It's about time to switch to Hornady/Hammer since you can actually buy them. I just haven't been impressed with what ELDX's do on game. They've dropped everything but have been a little too explosive for my taste.
Don't be afraid to try the eld-m. I'm loading them in my 280ai and at 2800 fps MV and they flat hammer IMO. I'm a double lunger though, not a high shoulder guy. But great terminal performance, 3/3 on 1 shot kills from 210-580 on 2 bucks and a bull.
 

grimm158

FNG
Joined
Jun 7, 2022
Messages
28
Location
Idaho
Don't be afraid to try the eld-m. I'm loading them in my 280ai and at 2800 fps MV and they flat hammer IMO. I'm a double lunger though, not a high shoulder guy. But great terminal performance, 3/3 on 1 shot kills from 210-580 on 2 bucks and a bull.
I know a few guys running those and they say great things. I've got a mental block about using target bullets for hunting.. Seems like everyone's running 215 hybrids in 300prc and I can't bring myself to load those either. Sounds like a me problem
 

ZWA

Lil-Rokslider
Joined
Jan 22, 2022
Messages
202
Keep the velocity a little lower on an ELDM and it performs well. If you like a complete energy dump it is perfect. If you want two holes and no limitations go mono.
The 162 shoots great in my 280AI and I have thought about giving the 180 a try.

On the 160 partitions I have 50 handloads made up with 4831 but can’t bring myself to shoot them until they become available.
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
I know a few guys running those and they say great things. I've got a mental block about using target bullets for hunting.. Seems like everyone's running 215 hybrids in 300prc and I can't bring myself to load those either. Sounds like a me problem
I think it just depends on the application. I'm all about that full energy dump into the vitals behind the shoulder, so I got great results. If I had tried to high shoulder for a DRT I may not have, I don't know. I also find terminal performance reviews on dead animals ironic.

Keep the velocity a little lower on an ELDM and it performs well. If you like a complete energy dump it is perfect. If you want two holes and no limitations go mono.
The 162 shoots great in my 280AI and I have thought about giving the 180 a try.
That aligns with my experience, I was content when I hit 2800fps because it was a sweet spot of acceptable ballistics and comfort to shoot. I was surprised that I did get a full pass through on the buck at 580 though. I grabbed a couple hundred 180's recently but I think they're going to be too fast out of my 28 Nos, and I think I found a powder that the Bergers are gonna jive with. If you're interested in them shoot me a message.
 

Petwa

FNG
Joined
Mar 10, 2023
Messages
13
The best hunting/accuracy load I have tried is the Barnes 150gr ttsx loaded to 3050fps. I have only shot two deer with this load. One at 60yds and the other at 150yds. This bullet/load combo shoots 1/2moa out of my rifle. I tried the Hornady 150 ELD-x bullets with a bunch of different loads and my gun does not shoot them well. I wished it did. I would like to try some accubonds but can never seem to find any in stock.
 

Habs22

FNG
Joined
Mar 27, 2023
Messages
5
If you can find, 155 terminal accent have been great. Best of both worlds of lead and copper.
 
Joined
Sep 28, 2018
Messages
2,203
Location
VA
The new hornady 160g CX mono looks fairly promising. Once i actually get my new rifle I'll test them but a .596 G1 ain't half bad if thats how it actually shakes out
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
The new hornady 160g CX mono looks fairly promising. Once i actually get my new rifle I'll test them but a .596 G1 ain't half bad if thats how it actually shakes out
Really considering trying them in 28 Nos because screw barrel life if you have a frickin laser beam.
 
Joined
May 22, 2023
Messages
335
Is that the one they designed for the 280ai? Because I love speed I’d be looking at the 139LRX. For elk tho I’d be interested in the 152.
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,956
Location
WA
Don't think there is a bad .284 partition... the only "bad" thing about partitions is they are shaped like a brick
Funniest Partition reference I've ever seen was "awesome killing bullets but they have the BC of a dining table" :LOL:
 

Austin Kaufman

Lil-Rokslider
Joined
May 24, 2023
Messages
266
I have been running the 162 ELD-X and have been really impressed with the results. Pretty violent wound channels!


Sent from my iPhone using Tapatalk
 

6.5Express

Lil-Rokslider
Joined
Mar 31, 2013
Messages
215
Location
WY
I didn't know there was a 152 option but the 145 sure seems like a "happy medium" in my 280 ai. I'm guessing the 152 would work very well as would a 139
 
Top