Erussell01
WKR
- Joined
- Jan 30, 2022
- Messages
- 1,032
Hey guys ... got new strings and cables on my ventum 33 and now I'm having troubles with broadhead flight. I can't seem to rest tune my broadheads into my field points and I'm super frustrated.
Here is my setup-
Ventum 33, 72# 31 inch dl. Running rip tko 250s , 29 inch carbon to carbon with 75 grain inserts. 3 fletch hard left helical max stealth and the factory nock.
Up and down impact is superb. Broadheads (tried 4 different flavors, grim reaper micro hades, slick trick, tooth of the arrow, ozcut 3 blade) hit to the right. I have tried moving rest 1/32 towards the field point incrementally, then away from the field point incrementally and nothing is working. Tried different releases, in case, tried nock tuning, and even tried dropping the draw weight to see if I'm underspined (which did bring it in slightly, but I can't imagine I'm underspined. My arrows come out to 470 grains and are running a little faster than my old axis 260 setup.
I have also tried 4 other fletching combinations including 3 and 4 fletch max stealth, blazers, max hunters, heat vanes and tac 2.75 vanes
Do I need to go get my cams shimmed? There isn't a good pro shop within a couple hours of me so I'm trying everything I can first.
Anybody have advice or experience?
Thanks guys.
Here is my setup-
Ventum 33, 72# 31 inch dl. Running rip tko 250s , 29 inch carbon to carbon with 75 grain inserts. 3 fletch hard left helical max stealth and the factory nock.
Up and down impact is superb. Broadheads (tried 4 different flavors, grim reaper micro hades, slick trick, tooth of the arrow, ozcut 3 blade) hit to the right. I have tried moving rest 1/32 towards the field point incrementally, then away from the field point incrementally and nothing is working. Tried different releases, in case, tried nock tuning, and even tried dropping the draw weight to see if I'm underspined (which did bring it in slightly, but I can't imagine I'm underspined. My arrows come out to 470 grains and are running a little faster than my old axis 260 setup.
I have also tried 4 other fletching combinations including 3 and 4 fletch max stealth, blazers, max hunters, heat vanes and tac 2.75 vanes
Do I need to go get my cams shimmed? There isn't a good pro shop within a couple hours of me so I'm trying everything I can first.
Anybody have advice or experience?
Thanks guys.