If I was building my SBR mini again, I would be hard pressed not to just do a 16” barrel with the 6OG instead. Don’t have to worry about all the SBR crap, pretty much the same weight and only a couple inches longer.
Thank you for mentioning this! I had talked to one of the Unkown guys via DM and he mentioned he'd hook me up on the initial release if I hit him up. If you hadn't mentioned it here I probably would have missed out on the group buy.
I was able to grab the last one late that night. Came in the mail yesterday.
All 25 were gone same day. The owner made a few posts on 24hr campfire. He said Tuesdays and Thursdays around 1pm CST are the times to keep an eye out. I was in a class and was refreshing their page every 10 minutes and saw them hit.
Others here have mentioned that when the 22” sporter contour is chopped down there isn’t enough outer diameter material to thread 5/8x24.
It’s a well documented issue with little to do to fix it. If you’ve cut or changed the spring that will make it worse. So far the only things that have helped are increasing the trigger pull, polishing all the contact points in the trigger, and cocking the bolt slower.
Page 58 I posted what I did to mine with some pics and it fixed it. You can also engage and disengage the safety after cocking.
