Howa Carbon Fibre Stock (Stockys) Arca Rail

[J_Jacobson196]

Happy New Year all!
Here in Australia we can't get anything through Stockys, but OSA does import the carbon fibre howa stock (made by Stockys) shown in the image below.
Has anyone successfully installed a full length arca rail to this stock and found that the stock was adequately rigid to provide a decent platform for the occasional shot off a tripod and for mounting a bipod?

If you have photos I'd be very interested in seeing!

 

[hereinaz]

Yes, and I bedded the rail to it. Put release agent on the stock with epoxy. Otherwise you put stress on it.

 

[J_Jacobson196]

Yes, and I bedded the rail to it. Put release agent on the stock with epoxy. Otherwise you put stress on it.

Fantastic, thanks, that's good to hear! Do you have any photos of it completed?

 

[hereinaz]

Fantastic, thanks, that's good to hear! Do you have any photos of it completed?

I have another to do, I will get some pictures and do a tutorial.

 

[Jbuck]

I put a Salmon River Solutions hunters rail on the kids Howa Mini with the stockysstocks carbon VG stock. I used the front sling stud and countersunk a T-Bolt into the rear of the barrel channel to secure the back of the rail. Tested it today and seems to work. I did not bed it to the stock but seems to fit pretty flush to the bottom. Since the fore end is so rounded it sits pretty proud on each side.

 

[J_Jacobson196]

I have another to do, I will get some pictures and do a tutorial.

Thank you, that would be appreciated!