Help tuning

[cole96]

I have used the search feature, but here is where I’m at.

Hoyt vtm 34 83 lbs 29” draw
I need help tuning fixed blade broadhesds. Shooting qad exodus. Elevation is fine as far as POI goes. I cannot for the life of me get the same windage. Nothing closer than 4”. I will adjust the windage on my rest to where the fixed blade has no tail but just can’t achieve the same POI. What do I do? Or just have separate marks on site for fixed and field point?

Hoyt vtm 34
29” draw 83 lbs
Easton 5.0 250 75 gr insert in front
How was bare shaft paper tuned when purchased about 1.5 years ago

 

[bow puller]

Distance its off 4" at?
Full blade exodus? Need plenty of vane and impeccable form to control that at the speeds you are pushing. Can be frustrating for sure.

 

[cole96]

Distance its off 4" at?
Full blade exodus? Need plenty of vane and impeccable form to control that at the speeds you are pushing. Can be frustrating for sure.

35 yards. Shooting 3 fletch. Aae max stealth

 

[bmart2622]

Youre moving the rest toward the bh group right?

 

[blackveltbowhunter]

I may have missed it. What direction is it off?

It sounds like you may need to swap spacers.

 

[cole96]

It hits to the right of field point

 

[Bump79]

Check centershot of rest. Record where it's at now. Move rest tiny amounts right. I'd do like 1/32" right.

It hits to the right of field point

Broadhead right = Rest right = cam left
Broadhead high = rest down = nocking point up

 

[cole96]

Check centershot of rest. Record where it's at now. Move rest tiny amounts right. I'd do like 1/32" right.


Broadhead right = Rest right = cam left
Broadhead high = rest down = nocking point up

Yep I’ve done that. May just have to go to archery shop this week and try that. I don’t have a press. Bow has been shooting great with FP and mechanical practice heads. Bought some QAD exodus for an elk hunt in a month and discovered this. If I can’t get it I will just stick with the mechanicals I got

 

[Wheels]

I would shoot thru paper again. You said it was paper tuned 1.5 years ago, same strings? What arrows were you shooting then?

 

[cole96]

I would shoot thru paper again. You said it was paper tuned 1.5 years ago, same strings? What arrows were you shooting then?

No to both that may have answered a lot of my headache. Was on factory string with east axis. Now on gas, with said arrow, and 80lb limbs. So a complete change

 

[bmart2622]

Paper tuning is a starting point, youre still going to have to broadhead tune