Help LS Wild design the new stock!

[Gstew1930]

For me the draw to this project is a lighter, cheaper mastersporter / bravo combo. The further we get from that the less of a draw it has for me. That's just my opinion though

 

[BBob]

The thumb in line with the bore helps you keep from torquing the grip.

That, exactly! It’s biggest feature IMO is reducing left right errors.

 

[Bluumoon]

That, exactly! It’s biggest feature IMO is reducing left right errors.

Little notch for repeatability.

 

[Bluumoon]

Finger groove is

 

[BBob]

Little notch for repeatability.

Finger groove is

I mentioned this before but deleted it. The original Magpul Hunter has an ambidextrous grip with two molded thumb indents on each side to index the thumb. I find this grip to be very shootable and repeatable.

 

[Marbles]

May add too much mill work, but consider doing scallops/insets on the butt, but not making it completely hollow. Say, leaving 1/4 inch of laminate web. Then, if people want to add weight, they can bolt them to this and you don't have two SKUs.

Other advantage is things can't get caught through it, such as brush. And, it will probably look better.

The added strength may let you thin out the material around the edges and be neutral on over all weight compared to a plain cutout.



If going full cutout, consider making the LOP fully adjustable. This would add complexity and cost, but fill a real need for youth/adult compatible stocks. The better way to do this might be as a post manufacturer modification. This is probably a pipe dream due to tooling costs.

 

[eoperator]

Spare magazine storage built into buttstock?

 

[Schmo]

Spare magazine storage built into buttstock?

Not enough room with having to skeletonize. LS mentioned that to me very early on. And then you have to have the special hardware made.

 

[BBob]

Not enough room with having to skeletonize. LS mentioned that to me very early on. And then you have to have the special hardware made.

.......and would jack the price up violating one of your major goals of affordability. Keep it as simple and to the point as possible.

 

[Bluumoon]

May add too much mill work, but consider doing scallops/insets on the butt, but not making it completely hollow. Say, leaving 1/4 inch of laminate web. Then, if people want to add weight, they can bolt them to this and you don't have two SKUs.

Other advantage is things can't get caught through it, such as brush. And, it will probably look better.

The added strength may let you thin out the material around the edges and be neutral on over all weight compared to a plain cutout.



If going full cutout, consider making the LOP fully adjustable. This would add complexity and cost, but fill a real need for youth/adult compatible stocks. The better way to do this might be as a post manufacturer modification. This is probably a pipe dream due to tooling costs.

A guy could drill from top to bottom through the rear and drop in lead tubes, throw tape over top and call it a day. Sounds like lots of diy room w the base idea.

 

[eLightfoot]

In progress

 

[Lawnboi]

Sporterized bench rest stock….. no negative comb, no super tall butt pad, just plain wood, thin, parallel line benches stock slimmed down to something I can carry. Either a mini chassis for aics mags.

 

[rbutcher1234]

Just make the master sporter stock 1:1 for a T3x and AICS bottom metal

 

[Chris in TN]

In progress

Wow.

This is the first time I’ve ever thrown an idea out to the Internet and seen somebody pick it up and run with it that fast, and I’m a little taken aback, and not sure what to say. But it looks like this is going to be a very cool project you have there.

 

[Schmo]

Just make the master sporter stock 1:1 for a T3x and AICS bottom metal

A laminate MS in 1:1 form would be 4 lbs.

Only AICS if flush mag is available

 

[bojangles808]

looks good. both the bravo and rokstock grips are perfect for me so I don't know how it compares to the MS but if its close i'm sure it will be a winner. bravo with a flatter toe and buttpad a little higher above bore with slight negative comb sounds sweet

 

[Schmo]

looks good. both the bravo and rokstock grips are perfect for me so I don't know how it compares to the MS but if its close i'm sure it will be a winner. bravo with a flatter toe and buttpad a little higher above bore with slight negative comb sounds sweet

We only make winners around here

 

[eLightfoot]

Wow.

This is the first time I’ve ever thrown an idea out to the Internet and seen somebody pick it up and run with it that fast, and I’m a little taken aback, and not sure what to say. But it looks like this is going to be a very cool project you have there.

I started this months ago