Heavy high bc monos for 7prc

WKR

WKR
Joined
Jun 14, 2019
Messages
1,935
What are some of the options?
168 lrx are good and I've got a few hundred

I'm not looking at the Hammers, as I've used them already and their claimed bc is bs. Plus I'm not a huge fan of the way they are designed To shed petals
Is there anything else out there thats on par or better than the LRX?
 
Joined
Mar 31, 2019
Messages
3,745
Location
Weiser, ID
Can't say for sure as I didn't shoot very many of them. I went through a phase of experimenting with mono's and Badlands were one of a few that I tried.
 

waitforit

Lil-Rokslider
Joined
Mar 23, 2019
Messages
183
Did you test the hammers on your own or read about them online? I'll just say.. BC very close to advertised out to 500 yds in my 7mm08 with several dead elk shot at various distances to show for it.
 

z987k

WKR
Joined
Sep 9, 2020
Messages
1,860
Location
AK
How bad is the copper fouling with those?
I shoot the badlands in my 6.5, 270 and 338. I've not had copper fouling issues and I don't clean my barrels very often.
A 7 twist 284 barrel is hard to find, but I've been thinking about it just for that 160gr bullet, but I'm already shooting the 150 in the 270 so, close enough.
I shoot the LRX in my 3006 because it's a slow twist tikka and it can stabilize the 175lrx.
 
OP
WKR

WKR

WKR
Joined
Jun 14, 2019
Messages
1,935
Did you test the hammers on your own or read about them online? I'll just say.. BC very close to advertised out to 500 yds in my 7mm08 with several dead elk shot at various distances to show for it.
I shot them for 2 years, so I did my own testing and data collection. They performed...okay terminally. But the bc was not what they stated. And I dont like bullets that fragment.
 
OP
WKR

WKR

WKR
Joined
Jun 14, 2019
Messages
1,935
I shoot the badlands in my 6.5, 270 and 338. I've not had copper fouling issues and I don't clean my barrels very often.
A 7 twist 284 barrel is hard to find, but I've been thinking about it just for that 160gr bullet, but I'm already shooting the 150 in the 270 so, close enough.
I shoot the LRX in my 3006 because it's a slow twist tikka and it can stabilize the 175lrx.
Nice, how's the terminal performance?
 
OP
WKR

WKR

WKR
Joined
Jun 14, 2019
Messages
1,935
And I should state, this will be a secondary load. Since I'm leaving California I'm not required to shoot mono's only anymore. But I still plan on coming back to hunt in CA so I need to develop a load for those hunts.
 

Hoghead

WKR
Joined
Jun 20, 2019
Messages
780
Location
Turlock California
These look interesting. Any experience?
I have shoot deer at 498 and 572 both fell instantly and didn't move. I shoot them out of a 7mm sherman max at 3200 fps. i have been shooting the 151 gr. i am working on the 170 have gotten 2900 fps with retumbo still working my way up.
 

z987k

WKR
Joined
Sep 9, 2020
Messages
1,860
Location
AK
Nice, how's the terminal performance?
I've had no issues. Caribou and a sheep with them so far. Everything was dead within a handful of yards of where it was shot.

There's a good terminal performance thread on them on LRH.
 

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,956
Location
Texas
PVA Cayuga

I have shoot deer at 498 and 572 both fell instantly and didn't move. I shoot them out of a 7mm sherman max at 3200 fps. i have been shooting the 151 gr. i am working on the 170 have gotten 2900 fps with retumbo still working my way up.

Have been curious about these for a while but hardly ever see anything about them. Looks like they’ve done well for you though
 

Hoghead

WKR
Joined
Jun 20, 2019
Messages
780
Location
Turlock California
Everything I have shot has fallen down, lol. They are very accurate, too. 500 yad group.
fcf9f6f408b969d0e4fa3f59b1b31233.jpg


Sent from my SM-G781V using Tapatalk
 
OP
WKR

WKR

WKR
Joined
Jun 14, 2019
Messages
1,935
I haven't heard very good things about the hornady CX. Barnes lrx seem to do better.
 
Top