Great demonstration of easy load "development"

[nm.otter]

It's a very clever hack. Standard chambering and freebore, just needs a 1:8" barrel and a long action/mag.

 

[wpeach1912]

The Berger LRHTs seems to be pretty forgiving accurate bullets. This was my “load dev” of 3 different charge weights in my 6.5 creed. 3 10 shot groups

 

[Schmo]

300 Super WSM isn't super well-known yet, but has real potential there.

Only if they’d load it with a good bullet.

 

[Schmo]

The Berger LRHTs seems to be pretty forgiving accurate bullets. This was my “load dev” of 3 different charge weights in my 6.5 creed. 3 10 shot groups

View attachment 963339

I’d say you have a great barrel!

 

[wpeach1912]

I’d say you have a great barrel!

Agreed. I don’t like it because it makes me only want barrels that shoot like that lol

 

[nm.otter]

Only if they’d load it with a good bullet.

Perfectly adequate for ELR target stuff. Commodity brass fired from standard long actions, burns less powder and produces lower recoil than most of what is currently shot there.

 

[huntnful]

The Berger LRHTs seems to be pretty forgiving accurate bullets. This was my “load dev” of 3 different charge weights in my 6.5 creed. 3 10 shot groups

View attachment 963339

Goodness! That’s a VERY dependable bullet/powder combo

 

[Schmo]

Perfectly adequate for ELR target stuff. Commodity brass fired from standard long actions, burns less powder and produces lower recoil than most of what is currently shot there.

Sure. Meant hunting wise lol.

 

[nm.otter]

Remember all the skepticism from the hunting community over the usefulness of long, high-BC bullets about 15 years ago?

This is just a longer, even higher BC projectile. I suspect we will see more of it.

 

[NorthIdahoDude]

Agreed. I don’t like it because it makes me only want barrels that shoot like that lol

Yes, I have had a couple like that over the years, and have one currently (maybe two, I've got a brand new one that is shooting exceptionally good also).

These experiences end up causing me to waste a lot of powder and bullets and headache on my other guns, none of which will get under 1.5MOA consistently.

I do 100% agree that all of the guns I've had that shot really well generally did not take much to get them there other than finding a bullet that shot well, and using a powder in the right burn rate for it (175 ELD-Xs and any powder in the neighborhood of IMR4831 in my 7x57 for example).

But I still have not 100% got to the point where I can just give up on a new rifle after the 4th or 5th thing I have tried makes obvious it's never going to shoot great. I really wish I could though, it gets pretty frustrating doing load development for a gun that's never going to pay off in the sub-MOA way that I know is possible because of my guns that do.