Flex-Fletch Silent Knight SK-200 FLEX2 - helical?

[buggz]

Hello,

Has anyone been able to put a serious helical on this vane?
I cannot.
I am using a Bitzenberger and left helical clamp.

 

[Buffalomtn]

Arizona EZ Fletch does it and I have used the Vane Master Pro to put up to 4* helical but typically run then at 3*

 

[Zac]

Hello,

Has anyone been able to put a serious helical on this vane?
I cannot.
I am using a Bitzenberger and left helical clamp.

Your not going to get extreme helical out of a Bitz ever.

 

[Archerichards]

Your not going to get extreme helical out of a Bitz ever.

Not wanting to divert the OPs question too far, but what do you think the limits are on Bitz helical...maybe 2 degrees? 3 degrees?

And I assume that the limit applies whether it is a right or left helical?

 

[Copen1822]

I also do 3* on the vane master pro but have done 4* with no issues.

Sent from my SM-G998U using Tapatalk

 

[Zac]

Not wanting to divert the OPs question too far, but what do you think the limits are on Bitz helical...maybe 2 degrees? 3 degrees?

And I assume that the limit applies whether it is a right or left helical?

It's 2.5 degrees. I used the indicator tool from DC Custom arrows.

Vane Angle Tool VAT - DCA Custom Arrows - Archery — DCA CUSTOM ARROWS

Vane Angle Tool VAT - Use this tool to precisely set up your Bitzenburger fletching jig to the desired helical (or offset) angle. The wrap shows angles from 0 - 6 degrees left Simple, precise. Bitzenburger Fletching Jig

www.dcacustomarrows.com

 

[justin davis]

It seems like I can get more out of the left side than going right. But maybe just the way it looks

I get about 3degrees out fo my bitz. Works great. Flex fletch Sk 200 vanes are awesome

 

[Zac]

Only once did I get 3 degrees and it really wasn't worth it. I had a death grip on the arrow and clamp in order to get the angle I needed.

 

[gelton]

For those of you using the SK200's how are they shooting with fixed blade broadheads? I have always used the SK300's in 3 fletch but just picked up some 200's for 4 fletch and man they just seem tiny compared to the 300's.

Probably overthinking it...these are being fletched in a 90 degree.

 

[Bbell12]

For those of you using the SK200's how are they shooting with fixed blade broadheads? I have always used the SK300's in 3 fletch but just picked up some 200's for 4 fletch and man they just seem tiny compared to the 300's.

Probably overthinking it...these are being fletched in a 90 degree.

Interested in the answer to this question. Looking to do the same with a 2 blade Kudu broadhead.