Gonewest
WKR
- Joined
- Apr 24, 2017
- Messages
- 361
Looking at the .223s. Is it a better option to get the 16” barrel and have it threaded or a longer barrel cut to 16” and threaded? Might be a stupid question but want to make sure.
It cost me $135.00 to have the barrel cut and threaded.Looking at the .223s. Is it a better option to get the 16” barrel and have it threaded or a longer barrel cut to 16” and threaded? Might be a stupid question but want to make sure.
To each their own - my family, close hunting friends, and I have killed somewhere around 27-28 big game animals the last handful of years with 139 scenars (6.5 creed) and 150 scenars (7 rem mag)...They are accurate, easy to load for killing bullets.I’ll pass on those.
Get whichever is cheaper.Looking at the .223s. Is it a better option to get the 16” barrel and have it threaded or a longer barrel cut to 16” and threaded? Might be a stupid question but want to make sure.
How were the blood trails?To each their own - my family, close hunting friends, and I have killed somewhere around 27-28 big game animals the last handful of years with 139 scenars (6.5 creed) and 150 scenars (7 rem mag)...They are accurate, easy to load for killing bullets.
Threading is usually cheaper than cut/crown/threading (not major difference but it is usually cheaper) so if you want 16" and can get that length off the get go for the same price or less then go for it.Looking at the .223s. Is it a better option to get the 16” barrel and have it threaded or a longer barrel cut to 16” and threaded? Might be a stupid question but want to make sure.
I think mid 200s is more common and then fees will eat the net return down to more like $200. But yes if the rifles are the same price vs the synthetic stock and you plan to replace it that is a lil boost.I see those wood stocks go for 300+ on eBay that'd certainly help kickstart a Tikka build
I pulled the trigger on one of these last week. Plan on using the 147 ELDm or 156 Berger. I have a bunch of 130 TMKs loaded for my 6.4 CM.I bought a Lite stainless 6.5 PRC a few days ago. I hope I like it. My Lapua brass should be here about the time the rifle gets here. Thinking about feeding it 142 grain ABLR bullets. We’ll see how it goes.
I recently purchased a roughtech in 6.5 prc. It’s a shooter and I love it so far, but it’s not exactly lightweight, and I’m coming in just under 9 lbs with a Trijicon credo 2.5-15 on top. Will eventually be moving to an ag composites stock and likely a proof profit to trim some weight. Not sure if the one you’re looking at is the same, but the d18 barrel on the roughtech adds some weightI'm trying to contemplate between the 6.5cm and 6.5 PRC in the Rough Tech superlight. The CM is a 20" barrel, and the PRC is 24". I am going to put a TBAC Ultra 9 6.5 on it. The CM is $200 cheaper. Decisions.
I picked up a 6.5 PRC for a moose hunt and its knocking me off my POA even with a Rokstok.I'm trying to contemplate between the 6.5cm and 6.5 PRC in the Rough Tech superlight. The CM is a 20" barrel, and the PRC is 24". I am going to put a TBAC Ultra 9 6.5 on it. The CM is $200 cheaper. Decisions.
Is this PRC suppressed?I picked up a 6.5 PRC for a moose hunt and its knocking me off my POA even with a Rokstok.
I was only able to get another 200fps out of reloads too, with 57gr powder instead of 43.5gr on my CM...
Get the 6.5 CM.
Yes. AB Raptor 8 and reflex.Is this PRC suppressed?
Dang. I may still buy one if I get a little tipsy before the sale ends.Yes. AB Raptor 8 and reflex.
Mine did what I needed it to do for the mission at hand but I probably won't shoot it much now that I'm tagged out.Dang. I may still buy one if I get a little tipsy before the sale ends.