neverquit
WKR
- Joined
- Feb 15, 2015
- Messages
- 599
I have been pondering this for a while but today I put all the pieces together.
Around here I do not need to talk much about gear and weight reduction. My tent is a 2 person that weights 2 lbs 9oz. But the factory pole is 11oz of that. This to me is unacceptable. My pole is a 48inch strait rigid pole. So here's my fix.
needed 2 carbon arrows
3 machine screws 8-32 2 inch long
5 inserts.
First I needed 2 carbon fiber arrows. I stopped at my local pro shop to pick supplys. I also I needed 5 inserts . I picked the gold tip x cutter due to its stiff spine and low gpi I have them cut down to 16 inches.
then I threaded a screw into the insert from the inside out.
then glued the screw and insert on one end and just an insert on the other.
Now 1.8 oz. I may put a slip on blunt on the ground end.
Around here I do not need to talk much about gear and weight reduction. My tent is a 2 person that weights 2 lbs 9oz. But the factory pole is 11oz of that. This to me is unacceptable. My pole is a 48inch strait rigid pole. So here's my fix.
needed 2 carbon arrows
3 machine screws 8-32 2 inch long
5 inserts.
First I needed 2 carbon fiber arrows. I stopped at my local pro shop to pick supplys. I also I needed 5 inserts . I picked the gold tip x cutter due to its stiff spine and low gpi I have them cut down to 16 inches.
then I threaded a screw into the insert from the inside out.
then glued the screw and insert on one end and just an insert on the other.
Now 1.8 oz. I may put a slip on blunt on the ground end.
Last edited: