I have a couple 50 cal CVA Wolf muzzleloaders.
I recently did some WT deer hunting and found out that the breech release opened when I was 'cradle carry'.
It also opened up when the gun was slung over my shoulder if the release was bumped. And the primer would fall out
So, I decided to install a 'release guard'
I had some aluminum strap, drill and tap and some 10:32 screws
It took about 30 minuted from start to finish
Here is my process - the pics should be mostly self-explanatory
I recently did some WT deer hunting and found out that the breech release opened when I was 'cradle carry'.
It also opened up when the gun was slung over my shoulder if the release was bumped. And the primer would fall out
So, I decided to install a 'release guard'
I had some aluminum strap, drill and tap and some 10:32 screws
It took about 30 minuted from start to finish
Here is my process - the pics should be mostly self-explanatory
Last edited:
