Cutting a Tikka factory stock

[Kyguy]

Who's cut one off to shorten the length of pull? Are the screw holes in the stock long enough to lose about 3/4" of pull and still hold a pad?

 

[Kauaihunter]

I cut the synthetic stock 1” and it still screwed in but the factory pad looked really funky because it doesn’t match up well at that point.

 

[Tahoe1305]

I’m down to 11.5” LOP didn’t have an issue. Used a grind to fit pad worked great.

 

[Kyguy]

I’m down to 11.5” LOP didn’t have an issue. Used a grind to fit pad worked great.

I'd do a grind to fit too. I just wanted to know that it wouldn't have to be a jimmy rigged thing with trying to glue a wood block in the stock to screw the pad to.

 

[Bowfinn]

Who's cut one off to shorten the length of pull? Are the screw holes in the stock long enough to lose about 3/4" of pull and still hold a pad?

If I remember correctly they are about 2-3” long.

 

[Tahoe1305]

I'd do a grind to fit too. I just wanted to know that it wouldn't have to be a jimmy rigged thing with trying to glue a wood block in the stock to screw the pad to.

I think I screwed into the plastic pillars but did add a smidge of glue too