Considering a move to smokeless

[CMP70306]

Which can are you using?

SilencerCo Hybrid

Excuse my ignorance here but is this only for the savage ML or can you convert a savage CF to a ML using this kit?? It says you can use an axis but it’s kind of vague.

Any centerfire that uses the savage small shank barrel threads. For example I use mine on an American Rifle Company action however a buddy built his on a savage axis and replaced the bolt head with one specifically for holding the primer modules. In my case the ARC actions are control round feed so I just reach up and slip the module under the extractor then close the bolt.

 

[ElDiablito]

Excuse my ignorance here but is this only for the savage ML or can you convert a savage CF to a ML using this kit?? It says you can use an axis but it’s kind of vague.

Those barrels are available in Savage small or large shank options.

 

[nockhunter]

How much is he charging if you don’t mind me asking

$400 for all of it, the DIS breech plug and 25 modules, machining time and shipping back.

Mike

 

[PA farmboy]

I built one of those cva conversions this year and don’t regret it for a second, put the Hankins ignition system in it and rolled. I’m shooting a 200gr bullet at 2750fps out of it. I’ll try to attach a picture of a 200 yard target and a couple groups I shot with it before season this fall.

 

[guitarpreston]

SilencerCo Hybrid

Any centerfire that uses the savage small shank barrel threads. For example I use mine on an American Rifle Company action however a buddy built his on a savage axis and replaced the bolt head with one specifically for holding the primer modules. In my case the ARC actions are control round feed so I just reach up and slip the module under the extractor then close the bolt.

Have you shot any BH through that can or just smokeless. If so what’s your BH velocity looking like and how is cleaning?