OverInfinite
Lil-Rokslider
- Joined
- Mar 9, 2023
- Messages
- 206
I may have to build me a prc... I couldn't get the 156 fast enough out of my 22" cm. At 2615fps it was being left behind in comparison to the 140VLD at 2765.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The 156 needs a mv of 2750+ to really shine, so I totally understand going to 140 class stuff. I have a 22in 7.5tw 65cm getting spun up, and I'll be using 144 hyb with tip opened up, or 135 atips.I may have to build me a prc... I couldn't get the 156 fast enough out of my 22" cm. At 2615fps it was being left behind in comparison to the 140VLD at 2765.
Wow, with that capacity you’ll be way over 3000. I’m at a comfortable 2985 running 57gr of n565 out of a 26” tube.My smith just received the 65 LRM reamer we specd out. I'm really tempted to have a barrel spun. 86-87gr capacity in a 22" barrel should comfortably run 3000mv with a 156 I'd think.
I typically run middle nodes. My 22in suam will shoot near 3000fps too, but it's close to psi, not worth it. I have built loads that appeared nowhere near psi, then been out shooting in rain, high humidity, misty conditions and Psi signs were very evident plus velocity was way up. Same exact load in a clean chamber a week later in good weather was totally back to normal.Wow, with that capacity you’ll be way over 3000. I’m at a comfortable 2985 running 57gr of n565 out of a 26” tube.
.347 is right on for me running 7.75 twist at 2985.Anyone notice AB now has the 156 listed at 334 g7 bc? A 348-352 has always been good for me with cartridges running 2900+ I usually am running 7.75 or 7.5tw though. I'm pretty sure I had an 8tw 65prc that was good at a high 340 value though too.
Need more gun!Exit on 580 yard quartering toward me shot.
View attachment 968855
Just removing the hide. Didn’t physically open the exit up at all.
View attachment 968856
Dude, consider me impressed honestly. I had my cannon along on every hunt and never pulled it out once. That 156 is plenty violent for me.Need more gun!![]()
Steve be like “I know this is plenty, but I’m gonna double it just because!”Dude, consider me impressed honestly. I had my cannon along on every hunt and never pulled it out once. That 156 is plenty violent for me.
That is literally me hahaha. I’m actually using a long barrel next year, cause an extra 30-40fps never hurt anyoneSteve be like “I know this is plenty, but I’m gonna double it just because!”
I’m curious. For the 6.5-7 with the 156, what could one expect for velocity out of a 20” barrel?That is literally me hahaha. I’m actually using a long barrel next year, cause an extra 30-40fps never hurt anyone![]()
Safely, high 2900’s or 3,000 even with N570.I’m curious. For the 6.5-7 with the 156, what could one expect for velocity out of a 20” barrel?
You sure that’s not H20 capacity? 28 Nosler can barely hold 86gr. of actual powder and is a much bigger parent case.I just had my smith cut me a 22in 65lrm, 7lrm parent case. Holds bout 86-87gr powder capacity. She'll get a steady diet of 156s with Retumbo once it's done.