OverInfinite
Lil-Rokslider
- Joined
- Mar 9, 2023
- Messages
- 194
I may have to build me a prc... I couldn't get the 156 fast enough out of my 22" cm. At 2615fps it was being left behind in comparison to the 140VLD at 2765.
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
The 156 needs a mv of 2750+ to really shine, so I totally understand going to 140 class stuff. I have a 22in 7.5tw 65cm getting spun up, and I'll be using 144 hyb with tip opened up, or 135 atips.I may have to build me a prc... I couldn't get the 156 fast enough out of my 22" cm. At 2615fps it was being left behind in comparison to the 140VLD at 2765.
Wow, with that capacity you’ll be way over 3000. I’m at a comfortable 2985 running 57gr of n565 out of a 26” tube.My smith just received the 65 LRM reamer we specd out. I'm really tempted to have a barrel spun. 86-87gr capacity in a 22" barrel should comfortably run 3000mv with a 156 I'd think.
I typically run middle nodes. My 22in suam will shoot near 3000fps too, but it's close to psi, not worth it. I have built loads that appeared nowhere near psi, then been out shooting in rain, high humidity, misty conditions and Psi signs were very evident plus velocity was way up. Same exact load in a clean chamber a week later in good weather was totally back to normal.Wow, with that capacity you’ll be way over 3000. I’m at a comfortable 2985 running 57gr of n565 out of a 26” tube.