Cock feather orientation

[archp625]

I am just getting started in the trad world. I got everything I need including an Easton Legacy arrow test kit to figure out what arrow spine/point weight shoot the best out of my bow. Once I get that figured out, I will fletch with feathers. What orientation of the cock feather should I shoot off the shelf? I have seen everything from it doesn't matter, cock feather facing away from the riser and cock feather facing the riser.

 

[nevadabugle]

I am just getting started in the trad world. I got everything I need including an Easton Legacy arrow test kit to figure out what arrow spine/point weight shoot the best out of my bow. Once I get that figured out, I will fletch with feathers. What orientation of the cock feather should I shoot off the shelf? I have seen everything from it doesn't matter, cock feather facing away from the riser and cock feather facing the riser.

Which ever way gives you the best flight... Don't mean to be a smart ass, but feather length, profile, shelf width, side plate design, how clean your release is, etc, will all affect how much contact you get.

I've had some set ups that shoot best with a "cock feather" straight towards the shelf, others the opposite. I would say that normally it's gonna be away from the shelf (9 oclock) to maybe 7 oclock. That's where I would start and then fine tune from there.

 

[Beendare]

I fletch my arrows so that the cock feather [3 fletch] is out and slightly up. I make them the perfect distance from the end of the shaft to just touch my nose as a secondary anchor point.

My bottom fletch ends up being partially in the crease at the riser.

 

[Wilderlife]

I've always had good luck with my cock feather being 'in', as in, pointed at about 3 o'clock when the arrow is on the string, for a right handed shooter. I've never felt the need to mess around with my cock feather being in different positions. That doesn't mean it's the best way either; it's just what I do.

 

[archp625]

Which ever way gives you the best flight... Don't mean to be a smart ass, but feather length, profile, shelf width, side plate design, how clean your release is, etc, will all affect how much contact you get.

I've had some set ups that shoot best with a "cock feather" straight towards the shelf, others the opposite. I would say that normally it's gonna be away from the shelf (9 oclock) to maybe 7 oclock. That's where I would start and then fine tune from there.

Don't feel bad at all. I have read a ton and watched a ton of videos and have seen it all. This is good info to know. Once I find what shoots the best, I obviously need to be consistent.

 

[North Idaho Stickbow]

I just 4-fletch so I don’t have to worry about it

 

[nevadabugle]

I just 4-fletch so I don’t have to worry about it

You still have to worry about it. Still need to make sure your not getting heavy contact. S

But once set, you are correct, you don't have to worry about which direction you nock your arrow. I shoot 4 fletch these days for that reason. One less thing that can go wrong in the heat of the moment.

 

[North Idaho Stickbow]

You still have to worry about it. Still need to make sure your not getting heavy contact. S

But once set, you are correct, you don't have to worry about which direction you nock your arrow. I shoot 4 fletch these days for that reason. One less thing that can go wrong in the heat of the moment.

That is true I suppose. I use a 2 or 3 inch feather or vane, fletch them straight at the 75/105 configuration, and it works great for me on all my bows.

 

[nevadabugle]

That is true I suppose. I use a 2 or 3 inch feather or vane, fletch them straight at the 75/105 configuration, and it works great for me on all my bows.

I use the same spacing, but I have to turn the nocks after fletching to get the cleanest flight off the shelf. Easy to do with Carbon arrows. Would be a bit more challenging with woodies.

 

[North Idaho Stickbow]

For sure. I don’t want to make it sound like magic, because it does take a little setup work, but I vastly prefer 4 fletch.

I do think 4 fletch hits a point of diminished returns when you use big fletching though.

 

[nevadabugle]

For sure. I don’t want to make it sound like magic, because it does take a little setup work, but I vastly prefer 4 fletch.

I do think 4 fletch hits a point of diminished returns when you use big fletching though.

Agree. I drop to three inch on my four fletch or really low profile 4 inch.