It was big pita to install (drilling holes cutting foam etc) but it looks clean and functions well. Drill bigger holes like others have said and I mounted mine a little further back to where the bolt would slide out but I don't think it's a big deal you can just unscrew and remove the riser if needed.
Thanks, great info, and nice camo job! Any thoughts on longevity of it? One guy mentioned breaking his riser off during but thankfully had a spare, made me think of how it would stand up to field use...
I almost experienced that. If your holes aren't wide enough it won't slide very easily at first until you wident them ebough. And then It gets stuck in you push it all the way down. I almost broke it but just went really slow with even pressure to get it back out. Once the holes are wide enough and everything fits and slides well then there's no issues. Just takes a lot of patience installing
For $16 you can't really go wrong.
Totally, agree. I got 2 in over the weekend, may test one out on the 10/22
I would, had I not broken mine. Wouldn't say the construction is the most robust, though I tend to be a bit of a brute. In my experience I would say that I should have oversized the holes drilled for the posts to reduce binding as you adjust the height. Hopefully at least my 2 cents is helpful. Good luck.
I'll have to check tonight. I'll let you know.
