Blacktails in timber

I’m the people you speak of. I pass a road like that and say “Not today Bigfoot. Not today.” while I’m hiking in the dark to go glass the cut.
Well now in the dark and in the daylight, those are 2 very different beast. I’m walking past that in the dark as well.

But mid morning to early afternoon I’m looking for a cruiser.
 
This thread gives me hope. Thank you all for sharing. Been chasing black tails in western Oregon the past 4 years!
Went scouting some of the recent burn areas near me today with a buddy in western Oregon. We found a nice canyon to glass and the clouds came in from all direction and instantly got socked in. Then started raining! As we drove back down out of the clouds we started seeing some deer. A couple small bucks and a few does.
Was nice to get out and hike around! Good to see some life out there.
 
Thanks to all the contributions to this thread! I live in NW Oregon and hunt the coast for blacktails. Ive hunted them now for a couple years and have always struggled mightily finding bucks. I used to hunt public and private lands where driving is allowed but deer sightings were sporadic at best. Since I changed to exclusively hunting behind locked gates, I've had much more deer sightings, still very little buck sigjtings. I don't get out as often as I'd like and that's also a big contribution to me not being successful.

As my kids are getting older, I'm finally getting out a bit more. I'm drinking this timber hunting advice like cool-aid!

This past week I tried hunting the deeper timber but it was so dense, branch riddled and toppled trees/ branches that there's no way to hunt it from my perspective. You spend more time trying to make your way through the maze and not making noise than actually looking for deer.

Im guessing that this type of "deep timber" isn't old enough to hunt like everyone is talking about? I need to find higher tree canopy sections where you can glass and see for a distance. Unfortunately there not much of that in the area I'm hunting. Theresa multiple clear cuts of various stages, but not deep timber where you can still hunt effectively (at least that I can't).

Should I look for other areas to hunt all together or just hunt the clear cura and walk the old skid roads hoping to cross paths with a buck (which I've done plenty and never seem to cross paths with deer).

There deer sign around,but not a ton.
 
I see only mountain goats have fewer threads than blacktails. I also see lots of "help, tips, blacktail question..." threads.

I thought I would post some of my experience and see if a few others would add to it in an effort to help some newer hunters and pass on some knowledge.
For reference, all my experience is western WA. The timber this concerns is relatively high from 3000-5500 ft elevation.

Still hunting and timber rarely get mentioned, that's my go to. Specifically big, open old growth timber. The tighter the canopy, the better. this shades out the under brush so visibility is good and deer use it at certain times because it's open. Some low salal or Oregon grape is good though, it's deer food!
The key to blacktails is habitat edges. The ideal combo is a 2-10 year old clear-cut(or burn) depending on how fast it grows(elevation), a 10-20 year old cut that is thick, alder/evergreen/brush mix and a stand of mature timber that has fairly open ground. If these 3 habitats are in close proximity, there will be a bunch of deer and a few mature bucks hiding in the thick stuff.

Quick side note, I've used tree stands to hunt the older brush patches. The elevation allows you to see into an otherwise impenetrable jungle. You have to force yourself to sit still and constantly glass because you may only get seconds. use a stand during the rut to find does, a buck WILL show up.

Back to the timber...
I love hunting the rut, in snow if possible. I actually wait for the right conditions before even trying timber. The best conditions make the deer move more. The day after a big snow or its just really cold. A big snow gets the deer to move down the mountain and into timber because the canopy initially holds about 50% of the snow.
If you know where the deer are going, you can intercept their movement. I have successfully hunted uphill to catch deer moving down after a big snow.
If it's just really cold, deer have to eat more to stay warm, thus they move more. During the rut, that means more buck movement.
I have also found 9am to noon is when deer get up and move when it's cold. I think they stay curled up and warm until either they have to eat or the air temp starts to rise.

Either way, ALL the mature bucks I've killed have been 9-noon.

I hit the timber once it's light enough I can see well. I go in with the mentality that I may only go half a mile all day if that's what it takes, or act like your life depends on seeing the deer first. I basically go tree to tree so slow my movement isn't fast enough to catch by a bedded deer. At each tree I glass as far as I can through all the openings. Don't assume because you looked there the last step, there's nothing to see one step later. You'll soon learn one step is all it takes!
Always keeping the wind in my face and listening for any noise that's out of place as well as looking behind me once in a while. Blacktails are surprisingly quiet in their environment.
One thing I've noticed with all deer, a buck tending a doe or actively herding a doe will try and keep the high ground. He'll stay above her pushing her down hill or will bed above her if she's bedded. obviously this is not a 100% guarantee like anything in hunting but I've seen it enough to know to look for it. Many times the buck is simply following on a string if the doe isn't hot and ready.
The buck I shot last November was bedded about 25 yards above the doe he was with. I saw her first and started looking uphill from her. There was a big tree between the buck and I, just as I was stepping around it to look, another doe came down through the trees towards the buck and 1st doe. The buck got up to check her, that's when he stepped out and I saw him. I later found his bed right where I expected it.
Deer seem to use the open timber often as a safe place because they can see anything moving as well as using the wind in decent weather. In nasty weather they seek the brush as shelter unless it's a full on wind storm, then they're back in the timber because they can see around them. it seems the high wind, commotion and noise has them on edge so being able to see their surroundings is important.

The other thing about timber is the size of the patch. Too big and it's a dead zone away from the edges. Too small and it's not useful. The right size seems to be a few hundred yards by a few hundred yards. big enough to serve a purpose and small enough to connect other habitats as a corridor as well.

One thing about timber is its a stable habitat in comparison to the Clear-cuts around it. Timber changes very slowly compared to how fast a clear-cut grows in the first 10 years. If you can find and figure out a patch of timber, you may have a spot for life. certainly the skills to hunt timber apply anywhere if your timber does change or get logged.

Elevation has a big part in late season success as well. You have to know when and where to find the deer or look until you find the elevation they're at. I hear "migrate" a lot. The area I hunt most isn't really a migration, the deer move up and down in elevation with the snow but they never really leave in a big migration.
Because the area is about 3000 feet top to bottom, I have a bunch of different patches of timber at different elevations according to snow depth and deer activity.

Often there are skid trails or grown up roads near any area you want to hunt. These usually grow up in Alder first. Check these for rub lines that indicate a mature buck in the area. If you find a rub up against the high bank, I've been able to see about how wide a buck is if the snow is deep enough he sweeps the off horn through it while rubbing. I've also hunted the same areas day after day/year after year and found most bucks rub right before it starts to get light. I've rarely seen a mature buck at first light during the rut.

The attached pic is the doe I spotted bedded and a few minutes later killed the buck last November. It's not very good because I was trying to do it holding my binos steady. You can see how open the timber is though. I'll attach a pic from another part of the same timber that has a few acres of salal and Oregon grape.
Also attached are the three bucks I killed in the same patch of timber.

If anyone can add to this or add another seldom used tactic, I'd love to see this become a knowledge source thread for noob's and people looking to expand their skills.
Thanks for taking the time to share your knowledge and experience. I live in Whatcom County and get out into the Mt. Baker Wilderness and am a noob hunter lol.
 
Back
Top