Anybody have the Tikka Area 419 Rail or Talley Action Rail

[backcountryplatinum]

Could you post a picture. I’m looking for the 6.75 inch length that’s tight to the rail.

Website shows the 419 flush but states 8 inches which seems incorrect.

Also would love to see the action length Talley

Thanks!

 

[RancherJohn]

Area 419 0 MOA

 

[backcountryplatinum]

Area 419 0 MOA

View attachment 1073604

Mind taking measurement. Curious the length of it? 6.75 inches? I think their website is wrong as it says over 8.25 inches.

 

[sndmn11]

The two 419s I have are action length, and closer to 6.25"

 

[backcountryplatinum]

The two 419s I have are action length, and closer to 6.25"

Thanks! I think that’s their only option.

 

[RancherJohn]

Mind taking measurement. Curious the length of it? 6.75 inches? I think their website is wrong as it says over 8.25 inches.

6.5"

 

[Stinky Coyote]

Area 419 milled to 0 moa, then eyeball filed both ends to clear 1” 3-9x40’s (I used a accupoint and prolly some 1” Leupolds up to have swap options) in old school weaver 1” low ring which gives scope height 1.5” or just under, for those that like thing low. Sharpie to touch up the precision filing work.

You’re seeing a 2.5x on it in the pic but this setup allows Max mounting options on factory stock. It’s about same height as Talley x-low or hair’s lower but way tougher.

Oh found when I fitted accupoint pic

Not sure why guys are resisting making 1.5” scope height direct clamp rail options in both 1” and 30mm?, would be a whole lot less fafo than going this route to get tougher than Talley but same height. So many stock tikkas running around it seems a huge miss to me...

A t084 or 48 in 1.5” height I’ll take half dozen of each right now, 3-9’s and lpvo’s and factory stock perfect zero fafo...fackin tikka-isms

 

[shomi]

This one is 2 or 3 years old