Anybody Else Having Failure to Feed with Tikka mags?

[nm.otter]

I just ordered some 10-round NDR magazines for my 6.5 CM. Looking forward to them.

I borrowed one for a class last month. Mostly good, but I did experience two failures to feed (out of about 140 rounds). Bolt closed a bit too easily, reopened to find nothing in the chamber. Instructor mentioned they had seen this occasionally before.

The rest of the world has been getting the upgraded 223 magazines with the steel insert for at least 5 years

From the Beretta AU catalog:

@Unknown Munitions are you guys able to order these through Sako Select? I suspect we'd have some takers here.

I forget the cost but was pretty significant for him to put springs in there. And I think he had to commit to like 2k springs.

@pods8 (Rugged Stitching) is partway down that road already.

 

[Formidilosus]

I borrowed one for a class last month. Mostly good, but I did experience two failures to feed (out of about 140 rounds). Bolt closed a bit too easily, reopened to find nothing in the chamber. Instructor mentioned they had seen this occasionally before.

A little filing on the mag latch fixes that.

 

[nm.otter]

A little filing on the mag latch fixes that.

Thanks. File the notch on the magazine, or the movable bit on the factory bottom 'metal'?

 

[Formidilosus]

Thanks. File the notch on the magazine, or the movable bit on the factory bottom 'metal'?

Magazine. Those, the Waters, and the Mambas are all a little tight on purpose so that the mag can be fit to each rifle.

 

[nm.otter]

Now that you mention it, Waters does describe this requirement.

 

[pods8 (Rugged Stitching)]

@pods8 (Rugged Stitching) is partway down that road already.

Yeah it’s not an inexpensive order hinging on the produced spring functioning correctly. You don’t get to just order a sample first to test.

I wouldn’t say the cost per spring is significant (in quantity) but for a side project the volume used in short order versus sunk cost is definitely a factor of consideration so you’re not in the red a long time on the cash outlay.