All new SRS suppressor mounts

[BrentH]

We didn't have any galling issues in testing. A lot of cans are Ti and run Ti HUB mounts without an issue. We might end up adding a DLC coated option eventually.

Ken

Any update/plans to offer these with a DLC coating?

 

[BrentH]

Any update/plans to offer these with a DLC coating?

Checking on this again @Salmon River Solutions

Alternatively, I had emailed UM a while back asking if it could be cerakoted. Jake emailed back and said yes. I never got around to ordering it, and now I see there is a red banner on the product page that says it cannot be cerakoted.

 

[Salmon River Solutions]

Checking on this again @Salmon River Solutions

Alternatively, I had emailed UM a while back asking if it could be cerakoted. Jake emailed back and said yes. I never got around to ordering it, and now I see there is a red banner on the product page that says it cannot be cerakoted.

The threads can't be cerakoted. It would never thread onto a can... And you can't really mask the OD threads.

We are looking at having a DLC option.

Ken

 

[WeiserBucks]

We are looking at having a DLC option.

Ken

Any update on DLC?

 

[gotlag1789]

I was just about to order one, as I have a new barrel coming, but this barrel will see decent strings of fire. - placeholder to follow up on dlc, as well.

Thanks!

 

[Salmon River Solutions]

Any update on DLC?

I was just about to order one, as I have a new barrel coming, but this barrel will see decent strings of fire. - placeholder to follow up on dlc, as well.

Thanks!

Pending a conversation with Silencer Central at the moment...

 

[WeiserBucks]

I wonder if they could be nitrided?

 

[gotlag1789]

Pending a conversation with Silencer Central at the moment...

Appreciate the update!

 

[Gstew1930]

I have a couple of these. They work great. Couldn't be happier. Shoot the brake enough in the suppressor and you won't need DLC lol

 

[gotlag1789]

I have a couple of these. They work great. Couldn't be happier. Shoot the brake enough in the suppressor and you won't need DLC lol

That’s what I’m saying haha.

I get the galling thing, I get it. But, chances of that really happening?.. eh. Turns into a direct thread

 

[rwing70]

Anything in the works on non timed version?

 

[swavescatter]

Following this thread as I just had to replace my Banish 30 Gold with the new V2 since my original can yeeted itself downrange...

Not having to pay a gunsmith to time the brake would be nice, and I don't want to run shims. I wonder if an omni directional brake would even improve sound reduction?

 

[Salmon River Solutions]

Following this thread as I just had to replace my Banish 30 Gold with the new V2 since my original can yeeted itself downrange...

Not having to pay a gunsmith to time the brake would be nice, and I don't want to run shims. I wonder if an omni directional brake would even improve sound reduction?

The brakes don't do much of anything when its inside the can, But they can potentially extend the suppressors life.

Ken

 

[rwing70]

The brakes don't do much of anything when its inside the can, But they can potentially extend the suppressors life.

Ken

Hey Ken, I would love to see a non timed version of the SRS cb brake for some of my smaller calibers. An plans for anything like that in the future?

 

[Salmon River Solutions]

We're going to be launching a CB adaptor. Not a brake. Just a CB attachment, minimum length, minimum weight.

Ken

 

[Graves14]

I have roughly 500 rounds through one of these brakes and have had no issues removing my can. DLC wouldn’t hurt but I also don’t think it is necessary.

Ken a mount only sounds interesting for additional weight savings on guns rhat won’t be shot without a can!

 

[Unckebob]

These are in stock and shipping now. We will also be adding a 1/2-28 30 cal option next week!

Don't forget we have a bundle option that gets you a free spanner wrench if you buy 3 brakes.

View attachment 731899

I have spanner wrenches and hate them. There has to be a better way.

 

[Salmon River Solutions]

I have spanner wrenches and hate them. There has to be a better way.

It's not exactly a spanner wrench. Its a piece of steel with 4 pins pressed into it. It goes onto a 3/8" drive ratchet.

Maybe that's the "better way"

Ken

 

[wind gypsy]

We're going to be launching a CB adaptor. Not a brake. Just a CB attachment, minimum length, minimum weight.

Ken

That's great Ken, sounds ideal for weight conscious rifles using CB cans.

I bought a heavy CB flash hider just to use as an adapter recently and would have definitely preferred this new solution you'll be offering. 9/16" would be great too.. I have a couple lite profile barrels that i couldn't get 5/8 without a shoulder but wanted biggest I could get so have 9/16".

 

[Salmon River Solutions]

That's great Ken, sounds ideal for weight conscious rifles using CB cans.

I bought a heavy CB flash hider just to use as an adapter recently and would have definitely preferred this new solution you'll be offering. 9/16" would be great too.. I have a couple lite profile barrels that i couldn't get 5/8 without a shoulder but wanted biggest I could get so have 9/16".

Good to know. We will look at adding smaller thread diameters.

FYI, the CB mini is gonna look really funny just looking at it not on a rifle.

Ken