95g TMK Recipes

[Hooskerdrew]

20” factory 243 barrel with 185 rounds down it.

42.5g staball 6.5 on left and 42.3g h4350 on right. Both at 2.787” coal, Peterson brass and 210s

Staball load was same charge as my 103 eldx load and shot around 75 fps slower than the 103s at 2.8” coal.

 

[surfr716]

6dasher Howa mini 16” barrel:

Peterson fired brass, cci41, 34gr LVR, 95TMK, 2.375” OAL: 2820fps

Hot!

really wanting to build one of these myself. did you ream the factory barrel or have a new one spun up, also who did you have open the bolt face?

 

[KyleR1985]

really wanting to build one of these myself. did you ream the factory barrel or have a new one spun up, also who did you have open the bolt face?

We just punched the factory barrel to proof the concept. It shoots good enough for me.

I could probably shrink groups from a bench at the range by a little buying an aftermarket barrel. But it would be heavier and more money. I’ll shoot this one till it’s dead, and probably rebarrel dasher again. It’s awesome, and I have 10 shot groups sub moa.

A buddy did the barrel and bolt. He’s a member here - and I have a whole thread on the rifle.


If you want to shoot anything longer than 2.4-2.45” OAL you’ll need to look elsewhere or do some real work to the gun.


If you want to shoot the 95tmk’s - it’s perfect for that. Hence post #51 above.