88 ELD-M. What to build.

Rooggvc

WKR
Joined
Aug 8, 2022
Messages
611
I have read on here that the 88 ELDM is a round to build a rifle around. So what would you build using a standard bolt face?
 
Just ”built” a 1:7 22-250 because I already had dies and brass on hand. Creedmoor is a better choice, but couldn’t find components when I was ready to go.

The 88s at 3050 from the 22-250 is a LOT of fun and will be used for anything and everything up to deer.

dave
 
Do the 1/8 twist barrels consistently stabilize it? I didn’t realize Tikka made a 1/8 22-250. I only saw 1/14 on their site.
 
Do the 1/8 twist barrels consistently stabilize it? I didn’t realize Tikka made a 1/8 22-250. I only saw 1/14 on their site.

Yes 1-8” 22-20 stabilizes it. The way is the T3x in 22-250 with the 1-8” twist, then send to @Shooter71 to rechamber to 22CM.
 
For hunting purposes, what velocity should I shoot for out of a 22 Creedmore? What would be the minimum velocity the 88 ELDM will reliably function at?
 
For hunting purposes, what velocity should I shoot for out of a 22 Creedmore? What would be the minimum velocity the 88 ELDM will reliably function at?

1,800’ish fps minimum. A 22 cm with a 20-22” barrel should be between 3,050-3,200 fps MV.
 
Should I have concerns about this projectile functioning reliably at the 3200 fps velocity. Just thinking of shoots at 100 yards or less.
 
Back
Top