7mm PRC H1000 recipe? and/or bullet suggestions?

[BossGobbler2024]

300 WSM?.... I thought you were talking about your 7PRC, since that's what this thread is about.

We were, Sorry..... My mind was on something else when I got out my notebook.
For My 7PRC load data it was 0.054 jump using H1000.

 

[Grunt-N-Gobble]

We were, Sorry..... My mind was on something else when I got out my notebook.
For My 7PRC load data it was 0.054 jump using H1000.

Thanks for the clarification

 

[Smerritt84]

70.5 grs of H1000
Nosler 160 Accubonds
Running right around 3060 out of a 22 inch barrel.
Shoots right around .5moa

Another load:
66.4 grains of N560
175 ELDX
Think velocity is around 2960 out of 22 inch barrel
Shouts small groups, even out to 500.

How much jump did you find worked best with the accubonds?

 

[skip189]

How much jump did you find worked best with the accubonds?

Sorry for delayed response...this load was .050 off lands where it seemed to like it the best.

 

[Smerritt84]

Sorry for delayed response...this load was .050 off lands where it seemed to like it the best.

Thank you

 

[Ganderzone]

175 eldx with 68 grains of h1000, adg brass and Magnum primers. Jumping.030". Velocity 2935 avg on a 22 xcaliber barrel. I've also ran 180 VLDs, Eldms and 175 elite hunters, it shot all these sub 3/4 moa, didn't have the time to mess with seating depth to tighten them up but they all looked to be capable of 1/2 with some tuning. The eldxs consistently printed 5 shot groups .4-.5 and always had nice rnd groups. Ran out of time before the hunt and stuck with the eldxs. Eventually I'll revisit the burgers and see if I can tune them under 1/2. Regardless, h1000 seems to be the easy button in the 7prc.

 

[Jbirdhunter]

160g Barnes with 70.8g H1000 .050 off is the ticket for me. 3170FPS .5" groups

 

[Adicted]

180 eldm, peterson brass, h1000 68.6 Avg Speed 3050 .5" groups so far

 

[Canyonbanger208]

180 eldm, peterson brass, h1000 68.6 Avg Speed 3050 .5" groups so far

Which primer and how far of a jump?

 

[V00D00]

I did a ladder the other day with eldx and h1000 loaded .030 off and found a really large flat spot at 63.5-64.1gns with a spread of 7fps shooting .2 gn intervals. I havent had a chance to go back and shoot groups yet to see what it looks like, nor have i had a chance to push past max. velocity was mid 2600s (18") so ive been focusing on retumbo.

 

[V00D00]

67gr
Cci 250
180 hybrid @ 3.3375” coal
ADG brass

Wasn’t a speed demon in my 18” but shot lights out

speed?

 

[TxLite]

speed?

Averaged around 2620. Took a few Antelope and whitetail from 220-405 yards without issue before switching to N570.

 

[V00D00]

Averaged around 2620. Took a few Antelope and whitetail from 220-405 yards without issue before switching to N570.

are you still shooting the 180gn with the 570? does 570 seem to be faster than retumbo if youve used it?

 

[TxLite]

are you still shooting the 180gn with the 570? does 570 seem to be faster than retumbo if youve used it?

Never tried retumbo but still shooting the n570. Never really pushed on the h1000 to see how fast I could get it, but my n570 load is about 240-250fps faster than my h1000 load without any obvious signs of overpressure. Still shoots lights out though