7mm-08 short barrel recommendations

[Schmo]

Not trying to derail anything here, but it’s related to the topic. If I wanted to run the 162 ELD-M at 2800 MV out of an 18-20” barrel, I don’t think even a long throat 708 could get me there. Would it take a 284 Win or 280 AI?

 

[Kimber7man]

Thanks. I want to try Big Game when I can find some. I refuse to pay shipping and hazmat just to get a pound of powder to try.

If you’re in Indiana I’ll help you out with some

 

[casey36]

A .284 might get you there. I dont think a 7mm-08 AI will. I'm sure someone with one of the aforementioned rounds will chime in and tell you what will do it. Pretty sure a 7saum or wsm will. Of course, you will need a mag bolt face.

 

[casey36]

If you’re in Indiana I’ll help you out with some

Thanks , but im in Pennsylvania.

 

[mlawrence125]

Not trying to derail anything here, but it’s related to the topic. If I wanted to run the 162 ELD-M at 2800 MV out of an 18-20” barrel, I don’t think even a long throat 708 could get me there. Would it take a 284 Win or 280 AI?

I got a 21" 284 Win and this is H4350 and Staball 6.5 with 162gr ELD-M

 

[steelheadmike]

Not trying to derail anything here, but it’s related to the topic. If I wanted to run the 162 ELD-M at 2800 MV out of an 18-20” barrel, I don’t think even a long throat 708 could get me there. Would it take a 284 Win or 280 AI?

The vanilla 7-08 won’t get there. You might get to 2650-2675 with a 20” and some loads running hot.

 

[wyosam]

A .284 might get you there. I dont think a 7mm-08 AI will. I'm sure someone with one of the aforementioned rounds will chime in and tell you what will do it. Pretty sure a 7saum or wsm will. Of course, you will need a mag bolt face.

My 20” 7-08 Ackley will get ~2730 with the 162 if I really lean on it. Shot really well there, but I don’t really have any need to beat on brass, so I run it 2675 or so.


Sent from my iPhone using Tapatalk

 

[casey36]

My 20” 7-08 Ackley will get ~2730 with the 162 if I really lean on it. Shot really well there, but I don’t really have any need to beat on brass, so I run it 2675 or so.


Sent from my iPhone using Tapatalk

Ive got just over 2600 with my Model Seven 7mm-08, but brass life wasn't great. It was older R-P brass.
I used 47.0gr of R-19 with a 160gr Partition. Shot pretty well so I carried it bear hunting one year. No bear were harmed in the process!

 

[TexasTB]

I run a 7mm-08 SAW (West Texas Ordnance) which is a 308 Palma SRP case necked down to 7mm. It is a Zermatt Origin action with a 20” Bartlein barrel. I shoot 162 ELDX over Varget powder and get 2750 fps.