7mm-08 Rem success on big game

[Bubbadoyle]

Someone correct me if Im wrong, but I thought I read, heard on here or from one of hornadys pod cast, that the sst bullet was the same as either the ELDX or ELDM? Ive been searching for sst's in the 308 superformance around home, and if I heard wrong please let me know, thanks!

From everything I’ve seen the eld-x is the new version of the SST and the eld-m is the new version of the amax. I’ve seen many reports of the eld-x failing like the SST.


Sent from my iPhone using Tapatalk

 

[OXN939]

thought I’d show some love to oft forgotten 7mm-08.

If anyone is forgetting 7-08, they are wrong. There is honestly very little in the lower 48 a 7-08 pushing copper 120s can't do. My current load uses Hammer Hunters because they're easy to load, but Barnes TTSXs will kill a mature elk all day long too. Also it's kind of nice not having to carry a 14 pound rifle around or get your labrum and ears blown out by a belted magnum that costs five dollars every time you pull the trigger.

 

[MarkOrtiz]

I understand impact velocity is very important for bullet performance. My failures were with a 180 gr SST out of a 300 RUM. Impact velocity should have been around 2900 fps. For the bullet to fail the way it did on a small whitetail doe makes my decision to never use a SST again for hunting. 2900 is a fairly high impact velocity but it’s certainly far from an extremely high impact velocity. I know there’s an impact velocity threshold at where the SST would not completely fragment but it seems exceptionally low in my opinion but might work ok for a 7-08.


Sent from my iPhone using Tapatalk

As The Guide pointed out this was Hornady custom lite reduced recoil. I just calculated the velocity and at 250 yards it was right about 2200 fps. I could see how faster cartridges could cause issues and change the performance.
My kids really don’t need the reduced recoil loads anymore, so the rest of what is left after our TX hunt will be used for practice and I will probably load 120 ttsx, 120 NBT, or step up to 140 accubond.

 

[Fogger]

That’s some real success with that old round.

 

[jjohnsonElknewbie]

As The Guide pointed out this was Hornady custom lite reduced recoil. I just calculated the velocity and at 250 yards it was right about 2200 fps. I could see how faster cartridges could cause issues and change the performance.
My kids really don’t need the reduced recoil loads anymore, so the rest of what is left after our TX hunt will be used for practice and I will probably load 120 ttsx, 120 NBT, or step up to 140 accubond.

The 120 NBT shoots very well out of my Tikka over 44 grains of Varget.

 

[Oregonmuley]

Oregon bull from a little over a week ago. My first shot was less than perfect so had to follow up but the 120 grain BT's did their job.

 

[KHNC]

Anyone use Federal Fusion 120gr in this one? I have a couple boxes. Killed a few WT with them at less than 100yds. Was considering shooting them this weekend and then using them next week on my muley hunt in CO. Otherwise, Ive probably killed over 75 WT with a 120gr Rem HP up to 250yds with great results. I only have about 10 rds of those left and was considering a change. Ammo is fkn hard to get still in some sizes. Im not a reloader.

 

[Ishootgunssometimes]

Sitka blacktail deer at about 30yds
Handload
120gn Barnes TTSX
3005 fps with Ramshot Big Game

 

[Pharmseller]

Anyone use Federal Fusion 120gr in this one? I have a couple boxes. Killed a few WT with them at less than 100yds. Was considering shooting them this weekend and then using them next week on my muley hunt in CO. Otherwise, Ive probably killed over 75 WT with a 120gr Rem HP up to 250yds with great results. I only have about 10 rds of those left and was considering a change. Ammo is fkn hard to get still in some sizes. Im not a reloader.

No personal experience with the 120 Fusion but I’ve read really good things about this load.




P

 

[KHNC]

No personal experience with the 120 Fusion but I’ve read really good things about this load.




P

It is very accurate to 100 yds. I will most likely use it next week. I also have a box of 120gr Barnes TTSX. It is pretty much one hole accurate at 100 off a bench. I really havent shot anything i can remember with the 120. The 168 TTSX does good from my 300WSM though. I plan to shoot to 500 if i have the opportunity, as I pretty confident with the right conditions. If I can get to under 300, that will be ideal.

 

[jjohnsonElknewbie]

Anyone use Federal Fusion 120gr in this one? I have a couple boxes. Killed a few WT with them at less than 100yds. Was considering shooting them this weekend and then using them next week on my muley hunt in CO. Otherwise, Ive probably killed over 75 WT with a 120gr Rem HP up to 250yds with great results. I only have about 10 rds of those left and was considering a change. Ammo is fkn hard to get still in some sizes. Im not a reloader.

According to Form, the Fusion is an excellent killing bullet. I picked up a couple hundred 150 Fusion overruns from Midway for my 7-08. It has been a really accurate load over SB 6.5.

I believe Federal still sells a 150 Fusion load in 7mag too that is very popular. Not sure why the Fusion component bullets are so hard to find. I've been trying to locate some 120 Fusions for my .25-284, and they're pretty much unobtainium.