7 SAUM N568

Maidenfan539

Super Moderator
Staff member
Joined
Apr 6, 2020
Messages
246
Does anyone have a starting load for N568 in a 7 SAUM with berger 168 VLD-H?

I have checked various places and can't seem to find anything.
 

waspocrew

WKR
Joined
Apr 2, 2022
Messages
819
Location
MT
Maybe send an email off the Berger? I picked up an 8lb jug of 568 a few months ago on a whim but haven't tried it out yet. I'd be interested to hear what Berger says as I also have a 7 SAUM.
 
Joined
Jul 21, 2015
Messages
537
Location
Wyoming
I’d highly doubt you will be able to get enough in the case to build pressure or achieve any velocity w a 168. Just my experience with N568 in larger 7mm cartridges and 180’s. That being said, you should be perfectly fine starting at 68 grains
 
Joined
Jul 21, 2015
Messages
537
Location
Wyoming
I've used H1000 with 180s in the Saum, but it was not the best performer with a 162 eldm. Figured 565 being same burn, would also be a bit on slow side.
Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.
 

khuber84

WKR
Joined
Jun 6, 2019
Messages
1,684
Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.
I'll be sure to try it in my 21" 6prc thats getting cut!
 

Gadjet

WKR
Joined
Dec 16, 2018
Messages
301
Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.
What’s your opinion on 565 out of a 20 inch 7PRC with 180 grain bullet?
 

codym

WKR
Joined
Jan 30, 2018
Messages
543
Location
Las Cruces
N565 is my favorite powder in my 7saum with 180 hybrids and that’s out of a 26’ barrel so your mileage may vary
 

Truaxdw

Lil-Rokslider
Joined
Oct 15, 2019
Messages
282
Location
Virginia
I just completed a similar load development for my 7 saum
18 inch barrel
175 ELDX
N560
Five shot groups three-quarter MOA
2747 average FPS
 
Joined
Jun 11, 2024
Messages
12
2950 is where I run it at but I could get another 75 fps but that’s a little too hot for me
Nice. Im building a 7 saum on a Tikka action right now. Bartien 26” 1-8 barrel. Looks like some N565 will be on order soon.
 

rootacres

WKR
Joined
Jan 5, 2018
Messages
1,095
Big fan of the 7 SAUM w/ the 168 VLDH. I have used H4350 for years. Mostly because it's what I had. Moved to H1000 recently. Pushing 2950 fps+ out of a 21" Proof tube. Still 2+ grains under book max.

I know not much help for your OP but both H1000 and H4350 are fairly easy to find. H4350 yielded great SDs for me. Plenty of juice for elk and deer. This year I'll be using H1000.
 
Top