7 SAUM N568

[Maidenfan539]

Does anyone have a starting load for N568 in a 7 SAUM with berger 168 VLD-H?

I have checked various places and can't seem to find anything.

 

[waspocrew]

Maybe send an email off the Berger? I picked up an 8lb jug of 568 a few months ago on a whim but haven't tried it out yet. I'd be interested to hear what Berger says as I also have a 7 SAUM.

 

[Shooter264]

I’d highly doubt you will be able to get enough in the case to build pressure or achieve any velocity w a 168. Just my experience with N568 in larger 7mm cartridges and 180’s. That being said, you should be perfectly fine starting at 68 grains

 

[khuber84]

Way too slow of powder, even for 180gr bullets. I'd suggest N555, N560 with a 168.

 

[Shooter264]

Way too slow of powder, even for 180gr bullets. I'd suggest N555, N560 with a 168.

565 is great powder as well for 168’s.

 

[khuber84]

565 is great powder as well for 168’s.

I've used H1000 with 180s in the Saum, but it was not the best performer with a 162 eldm. Figured 565 being same burn, would also be a bit on slow side.

 

[Shooter264]

I've used H1000 with 180s in the Saum, but it was not the best performer with a 162 eldm. Figured 565 being same burn, would also be a bit on slow side.

Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.

 

[khuber84]

Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.

I'll be sure to try it in my 21" 6prc thats getting cut!

 

[Gadjet]

Just recently did load dev for a 20” saum shooting 168’s for a member here and 565 was the best performer for me. Beat out 4350, and 555. I personally shoot a lot of 565 in my shorter bbl rifles and it seems to be a solid performer no matter the caliber on a saum based case. It’s my go to for my personal 7 saum shooting 180’s in a 22” barrel. Everything you posted is an excellent choice, just thought I’d throw one more in the mix.

What’s your opinion on 565 out of a 20 inch 7PRC with 180 grain bullet?

 

[Shooter264]

What’s your opinion on 565 out of a 20 inch 7PRC with 180 grain bullet?

Run it! Been running 565 in 21” 7mm Mega’s w 180’s and it works great. Pretty much the same case capacity of the PRC.

 

[codym]

N565 is my favorite powder in my 7saum with 180 hybrids and that’s out of a 26’ barrel so your mileage may vary

 

[Mtnman84]

N560 with the 180s works well

 

[Truaxdw]

I just completed a similar load development for my 7 saum
18 inch barrel
175 ELDX
N560
Five shot groups three-quarter MOA
2747 average FPS

 

[Myhuntfish]

N565 is my favorite powder in my 7saum with 180 hybrids and that’s out of a 26’ barrel so your mileage may vary

What velocity are you getting?

 

[codym]

2950 is where I run it at but I could get another 75 fps but that’s a little too hot for me

 

[Myhuntfish]

2950 is where I run it at but I could get another 75 fps but that’s a little too hot for me

Nice. Im building a 7 saum on a Tikka action right now. Bartien 26” 1-8 barrel. Looks like some N565 will be on order soon.

 

[codym]

Nice. Im building a 7 saum on a Tikka action right now. Bartien 26” 1-8 barrel. Looks like some N565 will be on order soon.

Throat it long, you will love it. H1000 did really well for us too

 

[Myhuntfish]

Throat it long, you will love it. H1000 did really well for us too

Yes that is the plan to throat it for either the 180 or 184 hybrids. Waiting for my brass to arrive tomorrow to make some dummy rounds.