6x45

[longrangelead]

Any downside to using a SB die for a bolt action?

I haven't had any SB caused issues. I typically loose brass to other reasons like primer pockets or split necks before sizing the base .002" more than a regular die.

 

[Taudisio]

I just made a random dummy round and I’ll probably be ordering a PBB barrel on Monday. I now have 2,500 95gr TMKs and it looks like it’ll be a good combo. Anyone have any velocity numbers with these out of a 20” barrel?
View attachment 959102

I would guess 2750 should be attainable based on the velocity I saw with my 16”. I also have 1500 on my bench and I need to find an accurate load. I have a junior hunter I’m taking out for deer the next few weekends. After the season, I’ll find a load and post my findings.

If you have the option (a bolt action), I would throat the barrel/load them out farther than I can with an AR magazine/lower.

 

[Deadspace]

I would guess 2750 should be attainable based on the velocity I saw with my 16”. I also have 1500 on my bench and I need to find an accurate load. I have a junior hunter I’m taking out for deer the next few weekends. After the season, I’ll find a load and post my findings.

If you have the option (a bolt action), I would throat the barrel/load them out farther than I can with an AR magazine/lower.

It’ll be for my tikka. That round is 2.53 long and fits perfectly in the water 2.6 OAL mag.

@longrangelead did you ever AI the 6x45?

 

[Taudisio]

It’ll be for my tikka. That round is 2.53 long and fits perfectly in the water 2.6 OAL mag.

@longrangelead did you ever AI the 6x45?

I wouldn’t put 2800-2825 out of the picture then. I stopped when the powder got crunchier that I felt comfortable loading. If I had more room…. Let us know how it goes!

 

[Deadspace]

I wouldn’t put 2800-2825 out of the picture then. I stopped when the powder got crunchier that I felt comfortable loading. If I had more room…. Let us know how it goes!

I’m liking those numbers. I have 4895 and 8208 on hand so I’ll be testing those out first with lapua brass and 205MAR primers.

 

[Taudisio]

I’m liking those numbers. I have 4895 and 8208 on hand so I’ll be testing those out first with lapua brass and 205MAR primers.

I haven’t played with those two powders in it yet (8208 is on my bench), I got my numbers from lc brass, #41 primers, and h335.

 

[KyleR1985]

I just made a random dummy round and I’ll probably be ordering a PBB barrel on Monday. I now have 2,500 95gr TMKs and it looks like it’ll be a good combo. Anyone have any velocity numbers with these out of a 20” barrel?
View attachment 959102

6x45 handi rifle, 19” barrel:

LC brass, cci41, 24gr 8208xbr, 95TMK, 2.5” OAL, 2630fps

Barrel only has 20 rounds or so fired.

It’s a satern 6x45 stubbed into a handi, with a fresh chamber from PTG 6x45 reamer.

I haven’t spent a ton of time with it yet, extractor wasn’t extracting or I’ve got a sticky chamber. Moving so I haven’t had time to diagnose. Was only able to fire a few rounds at range before moving to different gun.

I expect to be pushing 2700 with lever

 

[longrangelead]

It’ll be for my tikka. That round is 2.53 long and fits perfectly in the water 2.6 OAL mag.

@longrangelead did you ever AI the 6x45?

I did a AI in a 20" AR. I've only fire formed 100 cases and haven't got back to it yet.

 

[KyleR1985]

I just made a random dummy round and I’ll probably be ordering a PBB barrel on Monday. I now have 2,500 95gr TMKs and it looks like it’ll be a good combo. Anyone have any velocity numbers with these out of a 20” barrel?
View attachment 959102

M

Thread 'Does anyone use TAC in their 6x45?'

Jan 12, 2025

I have a 20" bolt gun that I'm working up a load for. I'm using Berger 87gr VLD-H, as this will be a hunting rifle. I tried H335 but velocities were lackluster (2,507 at max load).

I'm an experimenting with TAC in my 6.5 Grendel and my .223, and it seems like a natural fit for the 6x45. However, Berger nor Hodgdon have data on that powder in that caliber.

I have found a handful of pet loads from individuals, but I'd like to ask this community. Where is your starting point, and where did you stop? Velocities you got? Accuracy?

Those that respond minds well include their rifle/hand load...

• Megastink
• Replies: 22
• Forum: Reloading

@83cj-7

 

[83cj-7]

Sorry, I’ve never used the 95. I’m just stuck on what works. Sierra makes very accurate bullets, but in my experience they all seem “hard”. With the lower velocity from a 6x45, I’d be worried about not getting good expansion. Will it kill, yes of course, as well as softer bullets, no.

 

[83cj-7]

Since we are on the subject. Here are my two current 6x45s. Kinda opposite ends of the spectrum.

PBB Carbon 18”, Definace Ti, Hawkins Hunter. Weighs 7.5lbs as you see it!




Super effin heavy decked out for night hunting. Crazy fun to shoot because of the weight. You can see the bullets fly to the target through the NV.