6mm GT chamber question

[StreetCred]

Would CCI #41 (Mil Spec 5.56) primers work? The description says it's the same cup thickness and compound as the SR magnums. Don't see a lot of 450's available. I haven't been to my local Cabela's to see if they have any in stock.

 

[Coleredding00]

Would CCI #41 (Mil Spec 5.56) primers work? The description says it's the same cup thickness and compound as the SR magnums. Don't see a lot of 450's available. I haven't been to my local Cabela's to see if they have any in stock.

I don’t see why they wouldn’t, i don’t think the “magnum” part is even necessary on the 450s the thicker cup just helps the issue you’re having.

I don’t think it’s particularly unique to the 6GT, i can’t see how it would be, i think people just typically use magnums in the creedmoor case size because of the capacity so you don’t see it as commonly.

 

[Lawnboi]

Would CCI #41 (Mil Spec 5.56) primers work? The description says it's the same cup thickness and compound as the SR magnums. Don't see a lot of 450's available. I haven't been to my local Cabela's to see if they have any in stock.

Yes, same cup as a 450

 

[43.6N]

Would CCI #41 (Mil Spec 5.56) primers work? The description says it's the same cup thickness and compound as the SR magnums. Don't see a lot of 450's available. I haven't been to my local Cabela's to see if they have any in stock.

Those sound perfect

 

[StreetCred]

A quick Google search mentions that the anvil design is different and that the quality control isn't as strict with the NATO primers. Should be good enough to confirm they work in my rifle.

 

[nm.otter]

BR-4 also uses the thicker cup material.

 

[wind gypsy]

450s, BR4, #41, or rem 7.5 should all help with resistance to piercing. They've all seemed to be in pretty good stock at local stores in recent times.

 

[StreetCred]

450s, BR4, #41, or rem 7.5 should all help with resistance to piercing. They've all seemed to be in pretty good stock at local stores in recent times.

I'm pretty limited here in SE WI. Got a Cabela's close by. Next place that might carry primers is an hour away.

 

[nm.otter]

Midsouth has a pretty good price on Remington No. 7½ right now.

 

[Wiscgunner]

I'm pretty limited here in SE WI. Got a Cabela's close by. Next place that might carry primers is an hour away.

Where in SE WI are you located, roughly. Fleet Farm, Sportsmans, Recob, elkhorngunbarrel, Smitty's, Midwestern Shooter's Supply, Titan Reloading are a few places to check in SE WI.

Try working up to a load that works in your gun instead of book load or something others are using. As others have mentioned COAL is irrelevant except fitting magazines. I prefer to seat a bullet in an empty case and slowly seat it deeper until my bolt falls closed (firing pin removed). This get me a very accurate and consistent CBTO.

 

[StreetCred]

Where in SE WI are you located, roughly. Fleet Farm, Sportsmans, Recob, elkhorngunbarrel, Smitty's, Midwestern Shooter's Supply, Titan Reloading are a few places to check in SE WI.

Try working up to a load that works in your gun instead of book load or something others are using. As others have mentioned COAL is irrelevant except fitting magazines. I prefer to seat a bullet in an empty case and slowly seat it deeper until my bolt falls closed (firing pin removed). This get me a very accurate and consistent CBTO.

I'm up in Ozaukee Co. Didn't know Titan had powder/primers. Midwestern Shooters Supply is about an hour away. Longer to Sportsman's. Never heard of Recob or Smitty's.

I stopped at Cabela's in Richfield last night. Bought all they had of the CCI 450's (3x 100 packs) and a couple of the Winchester #41 5.56mm 100 packs.