6mm Creedmoor Rifle Build

[stan5677]

Long story short I've been kicking around the idea of a custom rifle for a years but life lifes and it never came together. I am thoroughly interested in a 6mm Creedmoor and would love to build one. Not looking to go balls to the wall with the build but something economical with quality components. Any recommendations on barrel, action, and stock (prefer a more sporter style stock)?

 

[SuperDUECE22]

Could start with something like this:

Solus Barreled Action

[email protected]

patriotvalleyarms.com

and stock options are almost endless

 

[handwerk]

I'd find a donor model 70 action and order a barrel and good synthetic stock than fits you and enjoy.

 

[Tanner]

What’s your target rifle weight with a scope and mounts on?

 

[270quest]

Tikka 8 twist 243, set back and rechamber for 6 creed. Thread the end. Do any cosmetics you may want in regards to bolt or barrel fluting. Bed in a quality McMillan, Stockys, Manners stock (or chassis if thats your thing) Cerakote it the colors you want and you will have a top shelf rifle.

 

[stan5677]

What’s your target rifle weight with a scope and mounts on?

Honestly, this will be used for stands and blinds but also light enough if I ever decide to head out west.

 

[Tanner]

Tikka 8 twist 243, set back and rechamber for 6 creed. Thread the end. Do any cosmetics you may want in regards to bolt or barrel fluting. Bed in a quality McMillan, Stockys, Manners stock (or chassis if thats your thing) Cerakote it the colors you want and you will have a top shelf rifle.

Great way to roll. I’d even go as far as to say, if the throating is adequate to shoot the bullets you want to focus on, I’d skip the punch out and just run the 243. Save the 300 bucks for components. This is a solid way into a cheap, accurate rig

 

[B23]

Mine is a semi custom built on a SA Rem 700, TT trigger, 20in Proof barrel, McMillan Varmint model stock. Nothing to fancy just a solid semi custom build with good parts.

Tikka would be a good factory action to build off of.

 

[Skerhunter]

Long story short I've been kicking around the idea of a custom rifle for a years but life lifes and it never came together. I am thoroughly interested in a 6mm Creedmoor and would love to build one. Not looking to go balls to the wall with the build but something economical with quality components. Any recommendations on barrel, action, and stock (prefer a more sporter style stock)?

If you list a budget it will help guys point you in the right direction!

Anymore you have a ton of R700 clones to pick from - zermatt big horn origin or aero solus would be great cheaper options. Lots of guys on here will suggest tikka and nothing wrong going that route either - price will be similar.

Nice 20” barrel if you want to shoot supressed - if not you could add some inches. Lots of great options for cut rifle blanks also. For me it always comes down to availability what I end up ordering (some lead times can be long). Carbon is always an option if you want it but it’s just more $$.

R700 clones the stock options are endless and tikka is pretty close. Prices range from a few hundred to $1600+.

 

[stan5677]

If you list a budget it will help guys point you in the right direction!

Anymore you have a ton of R700 clones to pick from - zermatt big horn origin or aero solus would be great cheaper options. Lots of guys on here will suggest tikka and nothing wrong going that route either - price will be similar.

Nice 20” barrel if you want to shoot supressed - if not you could add some inches. Lots of great options for cut rifle blanks also. For me it always comes down to availability what I end up ordering (some lead times can be long). Carbon is always an option if you want it but it’s just more $$.

R700 clones the stock options are endless and tikka is pretty close. Prices range from a few hundred to $1600+.

I would not mind a rebarrel at all with a tikka the way things go with me that would be the best or as someone mentioned earlier a Tikka 243 and set back. Honestly I want the performance so I'd probably opt for a 24'' barrel.

 

[SloppyJ]

I built one last year. I was going to go the tikka route but to me it was more economical to build off of a zermatt origin where I could swap bolt faces for future builds. That's my 3rd origin build and I'm working on my 4th. It's addictive. It did some work this year.

 

[stan5677]

I built one last year. I was going to go the tikka route but to me it was more economical to build off of a zermatt origin where I could swap bolt faces for future builds. That's my 3rd origin build and I'm working on my 4th. It's addictive. It did some work this year.

If I go go full custom route the actions I would look at would be the origin, Mac bros element and evo 2, kelbly atlas lite, kauger vpr or elite, and defiance classic


Sent from my iPhone using Tapatalk