6mm Creed Load Dev

[Feugomonkey]

Try the 450

 

[MD97756]

Try the 450

If I ever get srp brass. I’ll give em a go

 

[vonb]

26" Krieger Barrel:
115 DTACS w/ HBN & NoseRing
Alpha Brass LRP
CCI 200
41.0 gr H4350
2.199 BTO / 2.770 OAL
2948 fps

 

[Ckat]

My PH3 loves to push 109gr ELD-Ms with 42.0gr H4350. Alpha brass, CCI 450s, and 0.020” off the lands.

 

[KingOfTagSoup]

I'll be starting development with a 6 Creedmoor in the near future as well. Gonna start with 108 ELD-M and the new 107 TMK, h4350.

 

[mauiarcher]

every one pretty much using the LRP?

 

[hickswr]

every one pretty much using the LRP?

For extreme cold weather hunting, yes! For lowest possible SDs and match shooting, SRP is the way.

 

[skipper907]

every one pretty much using the LRP?

I have been using cci 400 for 4 yrs now with no problems and tested 100rds down to 10deg F using peterson brass and H4350

 

[92xj]

I’m getting ready to start my load development in a 20” ruger with a raptor can.

I’ve enjoyed hammers in my 300 so I’m going to try 90gr hhts in hornady brass, hoping to find some rl-16. Pure hunting, no comps. I’m thinking of using my fed 215m primers, as I have lots of them. Any negative thoughts on that?