doc holiday13
WKR
I'm finally gonna start breaking in my barrel. I'll be using some hornady 134 Eldm. I'll burn 200 of those and start on my 135 tmk. The attached photo is a 135g TMK next to hornady 134 eldm next to a 22 cal 77g smk and a 90g 6mm accubond .
The break in load is
Hornady 6.5creed brass necked down to 25 cal. Used a mandrel die to set neck tension at .0025
Cci LRP
40g rl-17
Hornady 134g ELDm seated to OAL listed in hornady's manual
The TMK will be
Alpha brass
Cci mag-SRP
H4350 probably 41.xx
OAL will be whatever my buddy set his OAL to because we have twin barrels
The break in load is
Hornady 6.5creed brass necked down to 25 cal. Used a mandrel die to set neck tension at .0025
Cci LRP
40g rl-17
Hornady 134g ELDm seated to OAL listed in hornady's manual
The TMK will be
Alpha brass
Cci mag-SRP
H4350 probably 41.xx
OAL will be whatever my buddy set his OAL to because we have twin barrels
