6mm ARC Velocities

Bigwilly556

Lil-Rokslider
Joined
Dec 24, 2021
Messages
188
Location
The mitten
I hated on the 6 arc ever since coming out. Found 2 proof 18" stainless barrels at my local dealer for a steal. Started looking into it further and ended up buying both. Sold one to a buddy. I'm hooked and plan on building a 14.5-16 for thermal use. So easy to load for and factory ammo everywhere. Compress_20241025_003601_1336.jpgFirst group 10 rounds in with 95 SMK blems. A mild load of varget approximately 2600 fps.Compress_20241025_003602_2359.jpg
Took it out on some steel with the same load 5 rds @411 yards. Should have bought all the 95 SMK blems at $14/100.Compress_20241025_003602_2128.jpg
95 berger classic hunter. Not the best BCs but do they shoot. 5rd groups @100 30 grains of lever @ 2725 fps 9.6 SD and 30.2 grains of lever @ 2772 fps 14.6 SD 20 thousands off. Im at 120 rounds thus far and I don't believe it's speed up all the way.Compress_20241025_003601_1888.jpgCompress_20241025_003601_1620.jpg
My buddy's shoots just as good. I'm hooked and this cartridge is just plain fun to shoot and load for. I did shoot some 75 grain vmax with AR Comp with a top load I was getting just over 3000 fps and my buddy ran some 58 vmax with benchmark at 3200 fps ( I dont have my notes in front of me ). 105 hybrids up next.
 
Joined
Dec 28, 2019
Messages
1,888
Whelp

I bought a lb of Leverevolution. Might as well try it with some 103 ELDX. Might pick up 150 FPS over my current load which helps with bullet drop in a hunting scenario.

If I hit 2800 FPS out of my 22” Howa with ~ 1 MOA accuracy, I’ll call it good for a hunting load.
 

VuduDoc

FNG
Joined
Jan 1, 2024
Messages
49
Location
Iowa
For those with experience, estimating and hoping to get 2550-2600fps out of a 16” AR with factory Hornady 108M. From what I’ve read here, seems reasonable? Considering a Howa or Tikka build in the same barrel length. Would be 1800fps out to 500yrds locally.
 
OP
TxLite

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,965
Location
Texas
For those with experience, estimating and hoping to get 2550-2600fps out of a 16” AR with factory Hornady 108M. From what I’ve read here, seems reasonable? Considering a Howa or Tikka build in the same barrel length. Would be 1800fps out to 500yrds locally.
It seems possible but likely barrel dependent. Mine is sitting around 2538 with a brand new barrel. I’m expecting it to speed up though. At my elevation (400’) my velocities in my 16” get me just past 500 yards.
 
OP
TxLite

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,965
Location
Texas
Adding another range session with the 16” proof barrel. Overall velocities were down 30-40fps across the board from the last range trip. Not sure why. Even when considering small sample sizes, every group was slower than last trip. Aside from the range being ~10-15 degrees cooler and changing brakes between range trips (lantac dragon asr is too long for sico scythe btw, the brake touches the first baffle) no other changes were made. Using the same lot #’s as the previous trip, but different boxes.

Looking at today’s session vs last session, this session averaged 2588 (with 1 shot over 2600) and last session averaged 2615 (with no shots under 2600) with the eldx.

IMG_0289.png
IMG_0290.png
 
Last edited:

HNTR918

WKR
Joined
Dec 7, 2018
Messages
453
Location
Colorado
New Bear Creek 16” barrel in AR side charge upper. 108 ELDM factory. Shots 1-7 over the LabRadar averaged 2480 fps and my drops seemed to line up well to 571 yards.

I shot the 103 ELDx as well and agree accuracy was similar but didn’t put that velocity in my app because the 108 shot so well.
What are your 3 round, 5 round, and 10 round group sizes?
 
Joined
Mar 6, 2013
Messages
3,273
What are your 3 round, 5 round, and 10 round group sizes?

I’ve only shot a 5 round and then checked zero a few times and the zero check fell in the bull so I called it good. Used the 6 ARC Sunday to shoot a whitetail buck.
5 shot group, as shots 2-6 on the barrel, adjusted and shot the one in the diamond bull as shot 7. Took it to distance after that, I believe 3 distances the furthest being 540 or 560.
IMG_4708.jpeg

I’ll get some higher round groups over the winter but at this point it’s been very consistent, predictable and hits what I shoot at. Those rifles are hard to find and I’m still less than 2 boxes of factory ammo run through it
 
OP
TxLite

TxLite

WKR
Joined
Sep 6, 2018
Messages
1,965
Location
Texas
Took the ARC back out today. Did a 10 shot “group” (2 groups of 5 at the same target). Took it out to 350 afterwards and sent 3.

Mirage was killer today but overall happy with it.

IMG_0829.jpeg

IMG_0839.png
IMG_0840.jpeg
IMG_0836.jpeg
 

KyleR1985

WKR
Joined
Jul 28, 2019
Messages
507
Red and green Christmas colors!

Average speed on a box of hornady 108’s.


Loaded up 95TMK’s No pressure up to max load, loaded 10 at 29.5 to see what a group looks like at 100.


16” faxon, I believe it had 100 rounds or so when I got it. So speed should be what it is.


IMG_4838.jpegIMG_4839.jpeg
 
Top