omicron1792
WKR
- Joined
- Feb 20, 2024
- Messages
- 1,114
Man that’s the good stuff!My boy just shot this beast tonight! 6 ARC, 60 yards, DRT... High shoulder shot, bam flop!
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Man that’s the good stuff!My boy just shot this beast tonight! 6 ARC, 60 yards, DRT... High shoulder shot, bam flop!
My boy just shot this beast tonight! 6 ARC, 60 yards, DRT... High shoulder shot, bam flop!
Ah sorry, totally missed that. Yeah that MV is slower than I would’ve thought as well, especially since LSWild shows 109ELDMs at 2890 on the graphic on their website. I didn’t think hand loads would be able to make that much of a difference, but I’m pretty new to all of this. Thanks for the info though! And great buck!Mv is in post it’s pretty slow with factory black hills little quicker with Hornady. Hoping to get 2750 out of it reloading heavy maybe more if I go to 95 tmk. Accuracy on the other hand is great. Right around 1” for 10 shots I’m sure if I got set up real well on a sled would be 3/4. I would go 18” if I wanted to shoot further but my density altitude is typically 3800-5500. Lethal at 1800 to 580 ish. I try to keep all shots under 500 unless follow ups.
I cant remember exactly, but I think it was around 130fps increase with 108 gr eldms in my 6 creed going from factory to handloads.Ah sorry, totally missed that. Yeah that MV is slower than I would’ve thought as well, especially since LSWild shows 109ELDMs at 2890 on the graphic on their website. I didn’t think hand loads would be able to make that much of a difference, but I’m pretty new to all of this. Thanks for the info though! And great buck!
What’s your handload?I cant remember exactly, but I think it was around 130fps increase with 108 gr eldms in my 6 creed going from factory to handloads.
Awesome. Good stuff!My oldest son got his first buck tonight... That's 3 for 3 with the 6 ARC! None made it further than 50 yards from impact.
Tikka T3X .243 Winchester. 108 ELDM at 331 yards. Stumbled a couple of steps and went down for the count.
View attachment 975445
Exit side.
View attachment 975446
Entrance.
View attachment 975447
I did the gutless thing and didn't survey the internal damage.

Although I've only killed 2 deer with a 90 eldx out of a 6 ARC I've noticed the same thing. I've since switched to bergers and eldm with three deer to study. I've concluded if I'm using a traditional cup and core bullet like the eldx it will be in a more substantial calibers. With the Eldm and bergers I tend to be more patient and pick my shot with no shoulder impacts allowed. The energy dump and massive damage of the eldm/bergers just kills quicker with less possible risk of a long tracking scenario. In the end it's still proper shot placement with the bullet in use.Question for Rokslide: this was my first season exclusively using a 6mm (.243/103) felt that animals ran further, but were dead on their feet making tracking more necessary than when I used a 308.
This is completely anecdotal and a very small data set. Do you have any input on this theory?
Me and my sons shot 5 deer and 2 elk using 6mm 108 ELDM since last fall.Question for Rokslide: this was my first season exclusively using a 6mm (.243/103) felt that animals ran further, but were dead on their feet making tracking more necessary than when I used a 308.
This is completely anecdotal and a very small data set. Do you have any input on this theory?
What do you think the difference between an eld-x and eld-m is?Although I've only killed 2 deer with a 90 eldx out of a 6 ARC I've noticed the same thing. I've since switched to bergers and eldm with three deer to study. I've concluded if I'm using a traditional cup and core bullet like the eldx it will be in a more substantial calibers. With the Eldm and bergers I tend to be more patient and pick my shot with no shoulder impacts allowed. The energy dump and massive damage of the eldm/bergers just kills quicker with less possible risk of a long tracking scenario. In the end it's still proper shot placement with the bullet in use.
Jacket thickness mostly. Eldx should mushroom, somewhat stay together, and have much better weight retention. Eldm or the like violently expands shedding much of it's weight as it dumps massive energy several inches into the game. The shock and sheer trauma from the eldm is too much to take.... with proper shot placement.What do you think the difference between an eld-x and eld-m is?
90 eldx or 95 BT. I’d shoot both and see what shoots bestWhat is the best bullet in a factory loaded .243 for western hunting on deer to elk sized game? 90 gr Nosler ballistic tip?
My nephew is looking at a .243 but he doesn't handload. Thanks in advance!