6 PRC data

[Junkel87]

Looking for some good starting loads or max loads for N560, N565 and N570. Will be shooting 115 dtac. Thanks

 

[A382DWDZQ]

55gr of 560?

 

[rharbaugh]

6mm prc

Anyone playing around with the 6mm prc? I see the 6UM post but I’ve got lots of prc brass that I can use. Wondering if I’ll be able to move a 108gr bullet 3000fps+ with an 18” barrel? Would you do the 6mm prc again or keep it simple and stick with the 6.5 prc?

rokslide.com

6 PRC reloading

A friend and I are having some 6 PRC barrels spun up, because we cannot control ourselves, and have magnum bolt faces to mess with. Barrel blanks are headed to the smith now. Thought I'd get a bit started with a dedicated thread on loads for this wildcat. We're using lapua brass. Lots of...

rokslide.com

6 PRC with N570

Yeah I do man. But it’s a 700 footprint, so it’ll be a while I think. They have a pile of tikka inlets to fill Thought they were different molds? Good input on tested BC. AB had the 109s measured down around 0.282 IIRC so interesting to hear they tested a bit better than that for you.

rokslide.com

Sent from my iPhone using Tapatalk