6 prc/ 6 saum

[Brucebarker024]

I’m looking at having a barrel spun up in either 6 prc or 6 saum. I have to get a reamer for my gunsmith no matter which one I choose. Planning a 20 inch barrel.

I have a bunch of new 7 saum brass that would be ideal to use if I did a 6 saum but I don’t want to neck turn and have no idea if that’ll be necessary.

Seems like most people are doing .180 freebore for the heavy bullets.

Any and all input is welcome!

 

[ThorM465]

How much MV do you need? Any reason that 6 creedmore wouldn't be a better gun?

 

[Brucebarker024]

How much MV do you need? Any reason that 6 creedmore wouldn't be a better gun?

There isn’t a reason other than I already have a magnum short action that just needs a barrel and not a standard bolt face. Also, fast is fun

 

[ThorM465]

No disagreement here on that. At some point burning through barrels gets old. If you're good with that then I'm happy to sit on the sidelines and watch. haha

 

[IrkedCitizen]

Sell the 7saum brass. Buy ADG 6UM30 brass, 6UM30 reamer, 6UM30 GO gauge, and N570 powder from Unknown Munitions. Buy 115gr DTAC nose ring HBN coated bullets from Tubb. Buy a 6mm 1:7.5" twist Osprey Barrel Works barrel from Patriot Valley Arms in whatever contour you want. Take to your gunsmith. Call it a day

 

[khuber84]

62gr N570 in a deep throated 6prc with a 115dtac also goes 3200fps. It's safe load in good weather, but psi signs in not so great conditions.

 

[codym]

Just a question, I love new wildcats but truly why go all through this when the 6 creed in a 20’ barrel gets me 3050 with 109’s. Seems like a lot of work for 150 fps. I’m not hating at all but the 25 saum/prc might make a bit more sense.

 

[khuber84]

Just a question, I love new wildcats but truly why go all through this when the 6 creed in a 20’ barrel gets me 3050 with 109’s. Seems like a lot of work for 150 fps. I’m not hating at all but the 25 saum/prc might make a bit more sense.

3050 from a 20in 6cm is pretty high psi unless using rl26.

 

[blacktailcentral]

Just a question, I love new wildcats but truly why go all through this when the 6 creed in a 20’ barrel gets me 3050 with 109’s. Seems like a lot of work for 150 fps. I’m not hating at all but the 25 saum/prc might make a bit more sense.

25 saum is god cartridge

 

[cal30_sniper]

I’d call up @hereinaz and get one of his 6NSI (6PRC) Tikka prefits. I wouldn’t have done the 6-284 route if that had been an option at the time.

 

[codym]

3050 from a 20in 6cm is pretty high psi unless using rl26.

I was getting it at 41.2 of RL16. I backed it down to 40gns for 2950 because it shot a little tighter there. Hornady has book max at 41.1 so I was pushing it a little bit.

 

[khuber84]

I was getting it at 41.2 of RL16. I backed it down to 40gns for 2950 because it shot a little tighter there. Hornady has book max at 41.1 so I was pushing it a little bit.

20in 6cm, 2950 is the goods. 18in 2850. These are usually all weather safe loads. That stuff loaded at 60k plus psi levels will bite a guy eventually, I know from personal experience. A guy can do as they wish, but what's 100fps? Not worth it in my opinion.