6.8 Western Brass

Joined
Dec 30, 2014
Messages
9,459
I would be surprised if Hornady didn't hop on getting the 25 CM saami approved soon. Although it did take a while and Horizon Firearms to really push to get the 22 CM SAAMI approved. The .257 is another caliber that has been neglected. If Hornady jumped on it we would at least get a steady flow of high BC bullets for it.

I'm pretty sure it's already in the works and they are rumored to be working on a 25 cal ATIP bullet too. There is a thread about it on the hide.

If I go above 6mm for a hunting barrel anytime soon it'll likely be a 25 cal.
 

Leaf Litter

Lil-Rokslider
Joined
Sep 8, 2022
Messages
212
7 SAUM brass is so close in size to the western, I’m curious what people’s reservations are about using it? I don’t have a Western yet, but it’s only a matter of time before a used barrel pops up, so I’m preplanning. :)
I bought a box of 50 ADG 7SAUM brass and fire formed it for my 6.8 Western, it works great. My only complaint is having to fire form, otherwise it's worlds better than Winchester brass. And if we're being honest, the fire forming loads shot as well as any finished loads I have in WW brass, so they're valuable to practice with. Just a few hundred FPS slower than I'd normally run with full fat loads.
 

TaperPin

WKR
Joined
Jul 12, 2023
Messages
3,092
I bought a box of 50 ADG 7SAUM brass and fire formed it for my 6.8 Western, it works great. My only complaint is having to fire form, otherwise it's worlds better than Winchester brass. And if we're being honest, the fire forming loads shot as well as any finished loads I have in WW brass, so they're valuable to practice with. Just a few hundred FPS slower than I'd normally run with full fat loads.
Nice!
There is a lot of 7 SAUM brass at a store locally so I will have to swing by and grab some. :)
 

Leaf Litter

Lil-Rokslider
Joined
Sep 8, 2022
Messages
212
Nice!
There is a lot of 7 SAUM brass at a store locally so I will have to swing by and grab some. :)
I only got a box because I'm waiting to reward ADG for running 6.8 Western. One man may not tip the scales a ton, but I can try.
 
Joined
Mar 27, 2019
Messages
828
Location
Lyon County, NV
The magic marketing fairy dust:
1. Spec a cartridge/chamber with the same premises that competition shooters have been getting their custom chambers and wildcats done for years
2. Do it in the calibers with the best bullets available that people who shoot high volume actually want
3. Keep ammo on the shelves at reasonable prices

In general, 6.8 doesn't do anything better than 6.5 PRC but recoil more and make people think they have more "knockdown power" with an addition 20 grains and 0.013" of bullet. It IS a great design IMO, just kind of plagued by 0.277 bore and the companies that introduced it.

A 7 western would be a neat cartridge. Pretty dang close to a 7 SAUM though for reloaders/custom gun people.

Agree with all this, and would add one thing - a lot of people's perceptions of cartridge quality are not absolute, but relative. Had 6.8W come out in 1971, it would be a legendary cartridge, with all the bullet weights you could ask for, and would be a benchmark round that others are judged against.

In absolute terms, it's an amazing cartridge.

In relative terms? Compared to other modernized and well-supported offerings?

Kinda meh.

And that's kinda sad.
 

SAUMan

FNG
Joined
May 20, 2024
Messages
22
Am I correct in assuming that I just neck size the 7 SAUM case and fire it in 6.8 chamber?
 

jgraff08

FNG
Joined
Jan 5, 2024
Messages
59
Ya im still on the fence about this brass issue but that's the idea I got some 7saum remington brass if you want to try it first I'll sell ya
 

SAUMan

FNG
Joined
May 20, 2024
Messages
22
Ya im still on the fence about this brass issue but that's the idea I got some 7saum remington brass if you want to try it first I'll sell ya
I'll try most anything ONCE!🤣 I have a bit of ADG around. Got a buddy that built a new 7 SAUM and only bought 1 box of brass at the time. Knowing how he likes to ladder test and wring every last .001" out of his group sizes, I knew he'd be in a panic for more and then there would be none. I grabbed him some when I saw it come available waiting for him to complain about not having any for hunting. Well, he lost his honey hole spot and now has pretty much lost interest. I thought about building one myself, but I have a 6.5 and a .300 recently built. I thought this Browning SPR might be ideal for me.
 

jgraff08

FNG
Joined
Jan 5, 2024
Messages
59
I'll try most anything ONCE!🤣 I have a bit of ADG around. Got a buddy that built a new 7 SAUM and only bought 1 box of brass at the time. Knowing how he likes to ladder test and wring every last .001" out of his group sizes, I knew he'd be in a panic for more and then there would be none. I grabbed him some when I saw it come available waiting for him to complain about not having any for hunting. Well, he lost his honey hole spot and now has pretty much lost interest. I thought about building one myself, but I have a 6.5 and a .300 recently built. I thought this Browning SPR might be ideal for me.
How did he lose the spot
 

SAUMan

FNG
Joined
May 20, 2024
Messages
22
How did he lose the spot
The farmer who owned the land leased it out and the deal was contingent on the lease coming with exclusive hunting rights. My buddy had been helping thin the herd for crop predation purposes. Didn't have a legal lease or anything.
 

gerry35

WKR
Joined
Jan 16, 2021
Messages
651
Location
Mara Lake B.C.
For those of you in Canada Nechako Outdoors in Vanderhoof has Winchester 6.8 Western brass in stock right now. Get them before they sell out.
 
Top