6.5 PRC comes ALIVE with VV powder

ssgjpd

Lil-Rokslider
Classified Approved
Joined
Mar 30, 2022
Messages
249
Location
texas
I will be testing out 560 and 565 here in the near future.
 
OP
K

kdrogers71775

Lil-Rokslider
Joined
Oct 1, 2023
Messages
108
Hit pressure with RL26 before ever getting to 2900 fps. Tight bolt, extractor marks, primers getting flat.
 
OP
K

kdrogers71775

Lil-Rokslider
Joined
Oct 1, 2023
Messages
108
Im definetely not saying that Im a proffesional hand loader. But ive been loading since i was 20 and im 48 now. When I can barely open the bolt and extractor marks are so deep they kick up a burr on the brass Im just not comfortable loading any farther. You probably can. But i just keep getting this mental picture of a bolt sticking out of my fact thats kinda hard to shake.
 
OP
K

kdrogers71775

Lil-Rokslider
Joined
Oct 1, 2023
Messages
108
I used it with the Lapua Scenar 139 grn bullets and was over 3200 fps on the first run. So im sure 3300 fps would not be hard at all. Im guessing the 143 eldx will be really close in velocity.
 
Joined
Sep 23, 2022
Messages
405
Location
Carolinas
Anyone using VV565 with 143gr eld-x?
If so, what powder weight, velocities and what is your barrel length?
I am. Initial pressure tests and velocities with 143gr ELD-X in the screenshot below. Progression was 52gr (shot 1) to 55gr (shot 7) in .5gr increments. As others have said the VV load max of 53.4gr is pretty vanilla; I did not get any indications of pressure and will be extending the loads up to 57-57.5gr this weekend.

1710883837042.jpeg
 

Vicomb

FNG
Joined
Dec 25, 2022
Messages
63
Location
Washington (WA)
I am. Initial pressure tests and velocities with 143gr ELD-X in the screenshot below. Progression was 52gr (shot 1) to 55gr (shot 7) in .5gr increments. As others have said the VV load max of 53.4gr is pretty vanilla; I did not get any indications of pressure and will be extending the loads up to 57-57.5gr this weekend.

View attachment 689308
I have a 22" barrel and was getting 2808 with the hornady factory ammo. I was hoping to get at least that. What is your barrel length?
 
Joined
Sep 23, 2022
Messages
405
Location
Carolinas
I have a 22" barrel and was getting 2808 with the hornady factory ammo. I was hoping to get at least that. What is your barrel length?
Tikka factory 24.3”, factory Hornady PH rounds average 2850ish but the SDs are wide (+/-60fps) with the lot number on hand.
 
Joined
Jun 18, 2019
Messages
1,752
Location
Indiana
I used N560 with a Berger 140 elite hunter in my 20" 6.5 PRC last fall. On a brand new barrel I was getting 2,950 fps with 58.3 grains.

Might need to try N565 with the 156 as well. Although I'm limited to 2.955" COAL due to Hawkins Hunter mag length.
 

Team4LongGun

Super Moderator
Staff member
Joined
Aug 4, 2019
Messages
1,798
Location
NW MT
I haven't tried this, but was told using non magnum primers would speed up my 6.5 prc velocities. Anyone load non mag primers?
 

Harvey_NW

WKR
Joined
Feb 13, 2019
Messages
1,978
Location
WA
I haven't tried this, but was told using non magnum primers would speed up my 6.5 prc velocities. Anyone load non mag primers?
I had the opposite effect in mine, from new started testing Rem 9 1/2 with H1000 and got 2950 with a 140, it had pretty wild ES so ended up switching to a CCI 200 and ran with it at 2850. Approaching 200 rds so I plan to test the mag primer again soon and see if I can get the free lunch.
 
Top