4 pin sight arrangement

[RMRForester15]

I am just getting back in to bow hunting. I used to bow hunt quite a bit through high school and younger so I am not a complete greenhorn.

I recently bought a new bow with a Trophy Ridge 4 pin sight. I will be using this bow and sight for a 3d shoot here in a few months, but I know that there will be a few shots out to 60 yards.

I was thinking about setting the top 3 pins as 20 yards- 30 yards- 40 yards and set my last pin at 60 yards. That means I would have to split my 40 and 60 yards pin for a 50 yards shot.

Does this sound like a horrible idea or is it common for people to do that?

Im open for any suggestions or if someone has a 5 or 7 pin sight they want to get rid of!

Thanks

 

[Tilzbow]

I’d run with 25, 40, 50, 60.

 

[OR Archer]

I’d run with 25, 40, 50, 60.

This or just 30 40 50 60. You’ll be 2-4” high at 20 using your 30.

 

[kicker338]

This or just 30 40 50 60. You’ll be 2-4” high at 20 using your 30.

2x on that, befor going to my ezv sight I used a 3 pin sight set at 40, 50, and 60yds. held low under 40 worked well.

 

[Violent Hippie]

I agree with the 30, 40, 50, 60 set up the others mentioned. This is off course if your pin gap isnt too significant between 10-30. If your bow is pretty modern and average in speed for today's compounds you should be fine with your first pin at 30.

 

[roadrunner]

X4 on 30, 40, 50, 60

 

[RMRForester15]

Thank you guys. I am going to try the 30, 40, 50, 60 and go from there!