22ARC with 77 TMK

WestTN2288

Lil-Rokslider
Joined
Jun 26, 2022
Messages
130
Anybody tried it yet? If so, any pointers? Specially what coal would fit without hitting the lands? How much (preferably percentage) did you or did you not reduce your powder charge for the reduced coal? Velocity?

Trying to get some pointers before I dive off in the rabbit hole blindly
 

The Guide

WKR
Joined
Aug 20, 2023
Messages
1,046
Location
Montana
Why not just run the 88eldm in it? The cartridge is optimized for the heavy bullets. The 77tmk is popular with the 223 because it is about the heaviest bullet you can magazine feed with a 223.

Jay
 
OP
W

WestTN2288

Lil-Rokslider
Joined
Jun 26, 2022
Messages
130
Entertainment mostly, but also just to have options. I am currently shooting the 75 and 88 Eld-ms pretty good, but I’m always watching for a good deal and like to have 3 or 4 options for everything
 

waspocrew

WKR
Joined
Apr 2, 2022
Messages
878
Location
MT
Are you shooting an AR or bolt? For COAL, you're going to need to determine that. Get yourself a comparator and find the distance to lands and adjust from there.

Hodgdon has data to get you started. It's with a Nosler RDF, but it will give you ideas of potential charges and velocity out of a 24" test barrel. Based off the stopping PSI, this is gas gun data so if loading bolt, you could push it a little more.

 

Der Schwabe

FNG
Classified Approved
Joined
Jul 4, 2023
Messages
34
Location
Libertyville, IL
I'm getting 2957 fps with mine. It's 20 or 30 thousandths off. I don't know how long it is, but mine's a single shot, so length isn't a problem.
 
Joined
Dec 30, 2014
Messages
9,924
Are you shooting an AR or bolt? For COAL, you're going to need to determine that. Get yourself a comparator and find the distance to lands and adjust from there.

Hodgdon has data to get you started. It's with a Nosler RDF, but it will give you ideas of potential charges and velocity out of a 24" test barrel. Based off the stopping PSI, this is gas gun data so if loading bolt, you could push it a little more.

Hornady publishes 62k psi bolt gun data too.

 

Bevo

FNG
Joined
Dec 10, 2019
Messages
13
I gave up on 22 ARC (just didn't fit in with my other calibers) but I did mess with 77 TMK before I threw in the towel. COL was 2.233" to the lands.

I loaded it with N133 and got 2900fps from a 20" AR. You could chase velo with Lever or CFE223.
 

Jesseb

WKR
Joined
Aug 9, 2016
Messages
516
Location
Redmond OR
I hit the lands at 2.238” and I am running 2.220” for coal. Cfe223 has me in the 2900 range with a 16” AR. At that coal, only the boat tail is below the neck so plenty of case capacity. I only briefly played with it as I was desperately trying to get the 88 eldm to work but the damn tips keep breaking off on the feed ramps. Didn’t end up having time to really develope the tmk load so I used my daughters 18” 223 wylde AR on my mule deer hunt last week and took a nice 26” wide big bodied toad at 250yds with the 77 tmk with a 2750fps muzzle velocity. Had a branch slightly blocking vitals on a perfectly broadside shot so I went with neck/shoulder junction and anchored him on the spot and still took out lungs somehow. These 77 tmk’s really are magic pixie dust. I need to add to the 223 kill thread.
 
Top