ztc92
WKR
- Joined
- May 8, 2022
- Messages
- 406
For those wondering, the AAC 77g OTM shot pretty well in my tikka. About 1.5MOA 10 shot groups. Also happy to report all 1000 rounds are the same lot. Overall, I am quite pleased given the price.
The neck length can be too long for smaller thin game like deer is what seems to worry people about bergers but my experience with them has been great. I also have not shot animals at the distances others here have because we just don’t normally have that available to us here in Texas with all the private land unless you intentionally set your shots up that way.Hey all, I’m VERY late to the party here but between this thread and the match bullet thread I’ve learned a ton. I’m an “adult onset” hunter and have hunted the last three years with a 7mm Rem Mag because that’s what all my buddies told me I needed and I didn’t know any better.
One question I’ve got (I’ve made it through about 60pgs so sorry if the answer is in here already) is this… the TMK is touted as being great because it expands immediately, and one of the downside of the Berger is that it has a slightly longer neck length before expanding. I would think the slightly longer neck length would be a positive, since it would minimize meat damage through a shoulder but still cause sufficient damage to the vitals. What am I missing? Thanks in advance!
None of these bullets are necessarily a bad choice. It’s all about what you want to prioritize.Hey all, I’m VERY late to the party here but between this thread and the match bullet thread I’ve learned a ton. I’m an “adult onset” hunter and have hunted the last three years with a 7mm Rem Mag because that’s what all my buddies told me I needed and I didn’t know any better.
One question I’ve got (I’ve made it through about 60pgs so sorry if the answer is in here already) is this… the TMK is touted as being great because it expands immediately, and one of the downside of the Berger is that it has a slightly longer neck length before expanding. I would think the slightly longer neck length would be a positive, since it would minimize meat damage through a shoulder but still cause sufficient damage to the vitals. What am I missing? Thanks in advance!
This is super helpful, thank you!None of these bullets are necessarily a bad choice. It’s all about what you want to prioritize.
The TMK tends to give you a football shaped wound channel while the Berger, Scenar and other tumble and fragment type bullets provide a wound channel that is more trumpet shaped in most cases. In my own personal experience with the latter, I’ve seen some that pencil or tumble through the onside lung and heart area on deer, only to fragment in the offside lung. I felt like the result was a longer post-shot run and more tracking. That said, using Bergers and Scenars isn’t a bad choice, just different.
On the issue of meat loss with the TMKs, my answer to that is just don’t shoot shoulders. I personally like to eat them and find it wasteful. I do agree that TMKs, ELDMs and ELDXs will damage more meat. It’s just a balance of how much tracking you want to do. If you are hunting in small parcels and having a deer run across a property boundary means it’s in your neighbor’s freezer, the TMK is your hedgehog. If you’re out on the wide open prairie and public land where you can watch your dog run away from you for three days, a Berger or a Barnes may work fine and result a little more meat in the freezer.
Finally, if longer distances and or shorter barrels are your bag, the TMK will likely perform better at lower velocities than a Berger or Scenar. Both of those seem to need about 2000 fps at impact to perform well. Most monos like Barnes need about 2100-2200 fps, ELDMs and ELDXs need about 1800 fps, TMKs seem like they can do pretty well down to 1600-1700 fps.
How many rounds does it generally take to break in a Tikka factory 223 barrel?
I'm going to test a couple options of 556 77gr but only have 20 rounds through it. I'd like to have the barrel sped up and carboned up before trying the 556 just in case they end up being a little too hot by the time the barrel is broke in. I was thinking I might pump some cheap 556 fmj through it with short range positional practice first.
Or does it not seem to matter with 223?
Thanks, I haven't seen that thread.The Impact of Losing Zero – Causes and Mitigation Strategies
Hi everyone, This forum is full of great information about the importance of maintaining zero on a rifle scope and how critical it is for accuracy, especially as ranges extend. I wanted to dive deeper into the potential sources of losing zero and strategies for addressing it. Recently, I’ve...rokslide.com